We need a splitter like the ZR1 splitter

[GTS Bruce]

Not a cow catcher or one suspended by wires. I have been careful not to fugly up the exterior of my GTS. Go get the pic of the ZR1. Integral with the cars front fascia. Fits on the front lower lip. Probably a bolt on or glue on.Wider than the front and incorporates wheel well canards. Yep a real beauty. Add side splitters ,difuser and the F1 wing (F1 dyno,DAVEM) and there would be function and a superb look. Whats the sense of adding rear aero and making the cars balance worse? I and many others ar holding out for a non cow catcher/suspension bridge splitter. The other pieces are already avilable. GTS Bruce

 

[dave6666]

Well, get the damn pic then!

 

[OVERBOOST]

What's wrong with either one of these splitters?

You must be registered for see images attach

 

[rmani]

What's wrong with either one of these splitters?

You must be registered for see images attach

That's a nice splitter who makes that one?

 

[OVERBOOST]

It's one of those new "Brooke Michaels" splitters.

 

[powerstream]

If there is enough interest I will manufacture such a splitter.
We manufacture splitters for race applications with many different mounting both adjustable and static.

We make them from carbon fiber and similar materials.

We produce approx 100 units per week in addition to the other race car parts we make.

Is there more interest in putting that type of splitter on a gen2 or gen 3?

Thanks

 

[dave6666]

If there is enough interest I will manufacture such a splitter.
We manufacture splitters for race applications with many different mounting both adjustable and static.

We make them from carbon fiber and similar materials.

We produce approx 100 units per week in addition to the other race car parts we make.

Is there more interest in putting that type of splitter on a gen2 or gen 3?

Thanks

If it fits the stock GTS fascia, yes from me. I do not like the Autoform fascia in the pic above.

 

[GTS Bruce]

Count me in for a zr1 type that fits a gen 2 stock fascia too.

 

[powerstream]

yes I would design it to work with a stock gen 2 GTS front fascia
Will you paint it or do you want the natural finish

 

[dave6666]

yes I would design it to work with a stock gen 2 GTS front fascia
Will you paint it or do you want the natural finish

Black preferred.

 

[GTS Bruce]

I would paint it car color.

 

[Flash Gordon]

I'd be in....

 

[Madduc]

I'm in...depends what it looks like for color choice.

 

[Chuck 98 RT/10]

We manufacture splitters for race applications with many different mounting both adjustable and static.

Lets take a look. Got a website?

 

[2MANYTOYS]

They do some cool stuff for Nascar.

 

[GTS Bruce]

MADDUC. The color would be anything you want. Natural makes it easier for the mnfgr. If you want black or a color you scuff it up and squirt on some flat or satin black for black. If a color after the scuff up and clean off you squirt on some primer and then the color you want. Spray can enamel stuff that various will be happy to supply in your color. Do it yourself or spend a little more and any paint shop can do it. GTS Bruce

 

[GTS Bruce]

Another problem is if its a lot lower than the current fascia. A lot of us have lowered cars. Possibly you could reproduce the rear wing of F1 if he doesn't mind. The H........... looking one but with the gurney flap. Too bad he only made 3. I have been reluctant to go the wing route because I always felt the front needed a little more downforce first and I did not want a balance nightmare or a cow catcher front end. GTS Bruce

 

[Madduc]

GTS Bruce, I just wanted to leave my options open depending on what it is made of. If it's carbonfiber and the pattern looks good, might just leave. Otherwise possibly black or maybe body color with the strips brought down through it.

 

[dave6666]

So where's the guy that's volunteering to make these for us?

 

[Jerry Dobson]

I would consider buying one.

 

[70chall440]

Id be interested.

 

[GTS Bruce]

Burp! Oh er Bump.

 

[GTS Bruce]

I bought a gt2 splitter and canards from JOn B. Having them painted now. GTS Bruce

 

[joedud]

I've been looking for one for my '08 since I got it. I would paint it to match.

 

[dave6666]

I bought a gt2 splitter and canards from JOn B. Having them painted now. GTS Bruce

Post pics when done. Based on the description in your original post, I'll be back to working on your dream splitter next week maybe. For my car anyways...

Oops. Sorry. I'm going to have support cables...

 

[Dom426h]

Who makes the splitter/facia on the Black car at the bottom of this thread??????
http://forums.viperclub.org/rt-10-gts-discussions/594700-ultimate-wheel-thread-12.html
to me it looks like a splitter add-on, not an entire facia replacment. ? (It looks similar to a Hennessy, but without the silly smiley-face crosshair opening.)

the one on that red viper, blows. its too plain and changes the look of the front end too much ....are those nostrils?

 

[J&R3xV10]

Dom I believe that is also an autoform splitter. hereis the link from thier site. http://www.autoformgroup.com/autofo...ategory_id=27&option=com_virtuemart&Itemid=26 the GTS front splitter or the RT Splitter are about as aweful as they get, looks like a fat lip..... IMHO But I perfer the GT2 or 08 ACR splitter. And I think the splitters front and side on the ZR1 look like ricer crap. I would bet its not worth crap on the track. The ACR aero package is designed for function and it does a supurb job at it with 1200lbs of down force. If you are looking to have a car that just looks "race car like" than buy a Honda or a mustang but if you want a race car, Viper is all about track performance. But just my thoughts not meant to "attack" anyone or cause problems.

You must be registered for see images

http://rds.yahoo.com/_ylt=A0S020x.8XtJsKkAdgajzbkF/SIG=135h9vbd3/EXP=1232945918/**http%

 

[Chuck 98 RT/10]

the GTS front splitter or the RT Splitter are about as aweful as they get, looks like a fat lip..... IMHO But I perfer the GT2 or 08 ACR splitter. And I think the splitters front and side on the ZR1 look like ricer crap. I would bet its not worth crap on the track. The ACR aero package is designed for function and it does a supurb job at it with 1200lbs of down force. If you are looking to have a car that just looks "race car like" than buy a Honda or a mustang but if you want a race car, Viper is all about track performance.

Agreed on all counts. The aero on the ACR is tested and proved. I used to think even posers would want something authentic. Maybe I was wrong.

 

[dave6666]

Agreed on all counts. The aero on the ACR is tested and proved. I used to think even posers would want something authentic. Maybe I was wrong.

You are completely wrong Chuck. I'm headed to the garage now with a spool of vinyl and some scissors to add more full race decals to my car just to spite you.

 

[Chuck 98 RT/10]

You are completely wrong Chuck. I'm headed to the garage now with a spool of vinyl and some scissors to add more full race decals to my car just to spite you.

I expect nothing less from you.