Garage / Shop floor covering question

netapp

Enthusiast
Joined
Sep 4, 2010
Posts
136
Reaction score
0
Location
East Texas
I just finished building my shop and am looking for floor covering. I was debating of using the epoxy paint from ucoatit.com but also found the plastic type snap together floor tiles. Has anyone had any experience with either 2 or have any other suggestions on another covering?
 

BlknBlu

Enthusiast
Joined
May 25, 2008
Posts
3,514
Reaction score
0
Location
Omaha, NE
if you have no budget they have other alternatives that are very durable and maintenance free.

Bruce
 

DrTaco

Viper Owner
Joined
Jul 30, 2009
Posts
512
Reaction score
0
Location
Oak Lawn, Illinois
Like many others I used Racedeck flooring and LOVE it. But, the only reason I used it is because I wanted a design in my flooring that I couldnt get with epoxy. Install was easy as cake, and the "hardest" part was trimming the edges to fit around uneven parts. I sweep it off once a week or so and have had 0 issues with it.

If you need some ideas, here's a link to a garage thread on the forum: http://forums.viperclub.org/threads/644163-Show-us-your-garage!?highlight=show+garage

Here's my floor:
You must be registered for see images attach
 

3whitevipers

VCA Venom Member
Joined
Feb 8, 2011
Posts
668
Reaction score
4
Location
Sarasota, Fl
Look into porcelain tile. I've used it in service areas of car dealerships and my own garage--It's bullet proof and very easy to clean--dry mop. Mine was cheaper that "race deck" plastic.---Dave
 

AZTVR

Enthusiast
Joined
Aug 28, 2005
Posts
3,043
Reaction score
7
Location
Chandler AZ
I just finished building my shop and am looking for floor covering. I was debating of using the epoxy paint from ucoatit.com but also found the plastic type snap together floor tiles. Has anyone had any experience with either 2 or have any other suggestions on another covering?

I've done two floors with this stuff. One was 10 years ago, one was last year. Very durable. But as with all paint, preparation is everything even with a new floor.

http://www.epoxy-coat.com/catalog/

Epoxy Coat seems to have a good reputation over on garagejournal forum and there is a company rep there that posts and answers questions. It is also available through Lowe's but only stocked in a few stores and special order through others. That was one of the products that I was considering; but, finally decided to just leave the garage as-is.
 

ViperCollector

Viper Owner
Joined
Jun 30, 2006
Posts
509
Reaction score
1
Location
Bettendorf, IA
Look into porcelain tile. I've used it in service areas of car dealerships and my own garage--It's bullet proof and very easy to clean--dry mop. Mine was cheaper that "race deck" plastic.---Dave

Porcelain? I've heard of VCT (Vinyl Composite Tile), but I would think porcelain wouldn't handle loads well - especially when raising via jack/jackstands or installing a lift. May have to look into it...
 

Roadtrip

Enthusiast
Joined
Oct 15, 2001
Posts
89
Reaction score
0
Location
Crystal Lake, IL
As an alternative to epoxy, I had my concrete floors polished, they can be stained (left mine natural) and is under $3 p/sq ft. It's also durable because of the densifier they use (with exception to salt). Mine were modeled to give them a marble like texture.
 

Attachments

  • IMG_2250.jpg
    IMG_2250.jpg
    47.7 KB · Views: 143

v10enomous

Enthusiast
Joined
Aug 1, 2009
Posts
5,248
Reaction score
0
Location
NW Jersey
I used concrete stain. It looks good with the old world style of my house. The finish has a distressed look to start with so it doesn't really look much different in the winter when I'm tracking snow with sand and salt in an out. I didn't want something that I have to constantly clean.

You must be registered for see images attach

You must be registered for see images attach
 

3whitevipers

VCA Venom Member
Joined
Feb 8, 2011
Posts
668
Reaction score
4
Location
Sarasota, Fl
Porcelain Tile is bullet proof assuming it is laid flat with a complete coat of 'thinset" under it. I've used it for years in my car dealerships in the service areas. It's completely stain proof. Porcelain tile has color completely thru the tile thickness so the very unlikely chip is invisible. We always use floor jacks on it and the guys just drag the jacks where needed. I found that the race deck plastic tiles would dent with floor jacks when lifting a car or truck. I know it sounds weird but the stuff really works. My home garage is done with it (3350 sq.ft.) and folks say my garage floor looks like a floor in their home. It's incredibly easy to clean as nothing sticks to it. Oil based products just lay on the surface. Dirt comes off with a dry mop. All I can say is that my service depts. look amazing and are very inviting for the customers to see. May want to think out of the box on this one. One guy told me that the new BMW dealerships must be done this way as demanded by BMW.---Dave
 

PDCjonny

Enthusiast
Joined
Nov 2, 2004
Posts
5,999
Reaction score
3
As an alternative to epoxy, I had my concrete floors polished, they can be stained (left mine natural) and is under $3 p/sq ft. It's also durable because of the densifier they use (with exception to salt). Mine were modeled to give them a marble like texture.

Polished concrete looks terrific, but I got quotes here (New York) of $8.00-10.00 per sq ft and that's just too much, I have 750 sq ft.
At $3.00 a foot I would have had it done already...
Porcelain tiles get great reviews on garagejournal they are extremely durable despite what you would think.
 

VYPR BYT 94

Enthusiast
Joined
Mar 20, 2011
Posts
2,458
Reaction score
1
Location
Green, OH
Dave, I have 310 feet of porcelain in my kitchen but never dreamed of it in the garage. This is intriguing ... what if the floor has a drain where the floor isn't flat? It slopes around that area. Would that area need to be leveled before applying the tile?
 

Silver04

Enthusiast
Joined
Jan 10, 2012
Posts
581
Reaction score
0
Location
San Antonio, TX
Stained my garage floor Malay Tan and Dolphin Blue after investigating several options, including tile and Epoxy. Went this route because everyone and their mother seems to have Epoxy in my neighborhood and I like being the black sheep...The folks that come over seem to notice the car first though!
 

Roadtrip

Enthusiast
Joined
Oct 15, 2001
Posts
89
Reaction score
0
Location
Crystal Lake, IL
Polished concrete looks terrific, but I got quotes here (New York) of $8.00-10.00 per sq ft and that's just too much, I have 750 sq ft.
At $3.00 a foot I would have had it done already...
Porcelain tiles get great reviews on garagejournal they are extremely durable despite what you would think.

Wow $8 to $10 seems crazy high. I think in the Chicagoland area the highest quote I got was around $5 p square foot. The Epoxy quotes were pretty high though.
 

steve911

Enthusiast
Joined
Sep 11, 2003
Posts
1,651
Reaction score
3
Location
Cottage Grove, Wi.
I used VCT Tile (1350 SF) It has held up well after I waxed it. It is really cheap in the grand scheme of things and come in a ton of colors. Here are some pics of my place where I keep the snakes.
You must be registered for see images attach
You must be registered for see images attach
 

cfiiman

Viper Owner
Joined
Nov 3, 2010
Posts
1,173
Reaction score
1
Location
Southwest FL
I used VCT Tile (1350 SF) It has held up well after I waxed it. It is really cheap in the grand scheme of things and come in a ton of colors. Here are some pics of my place where I keep the snakes.
You must be registered for see images attach
You must be registered for see images attach

Steve,

thanks looks awesome!!! How do you lay the VCT tile? I see this stuff at Home Depot for next to nothing, just want to make sure I'm looking at the right stuff? Do you use a glue, or thinset or???? Is there a ton of surface prep or is it as easy as laying tile in a kitchen or bath? Thanks for any help!
 

steve911

Enthusiast
Joined
Sep 11, 2003
Posts
1,651
Reaction score
3
Location
Cottage Grove, Wi.
Steve,

thanks looks awesome!!! How do you lay the VCT tile? I see this stuff at Home Depot for next to nothing, just want to make sure I'm looking at the right stuff? Do you use a glue, or thinset or???? Is there a ton of surface prep or is it as easy as laying tile in a kitchen or bath? Thanks for any help!

The VCT I used is the Commercial grade stuff from Armstrong. Everything I learned about installing it came from the Armstrong Website. It is very extensive. I used Armstong's Tile adhesive to hold it down.

Those pics were taken right after I waxed it. It has held up really well. I jack cars on it, the snow drips on it, It gets dirty. I mop it and have waxed a couple of more times in the 2 1/2 years since it was down. I did break one tile when I dropped a strater on from about 3 1/2 feet high. It was easy to scrape out the broken one and glue down a new one.
 

lmcgrew79

Viper Owner
Joined
Jul 20, 2011
Posts
231
Reaction score
0
Location
Hurricane, WV
Im a union painting & drywall contractor, and we do good bit of commercial and industrial epoxy, aiphatic urethane, stamped, and acid etched floors. We use sherwin williams, tennant, hp spartacote to name a few. There are plenty of good manufactures of coatings, but as someone said above the prep work is what matters more than anything. I would suggest that you get someone to shot blast your concrete before.

Generally the best coating is a shotblast, prime coat, base coat, and aiphatic urethane top coat.
Full broadcasted floors look great, imo. Torginol is where we general get our color chips as they can custom mix them how ever you like.

Any questions feel free to ask.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

Canyon707

Enthusiast
Joined
Mar 21, 2007
Posts
1,405
Reaction score
0
Location
Napa California
Stonhard is the best by far hands down. you can beat it with a hammer. floor jacks oil etc by far the best there are a lot of posts on this. Tried and ture product. Used in clean rooms etc.
 

ViperTony

Enthusiast
Joined
Apr 3, 2006
Posts
7,554
Reaction score
0
I'm thinking about doing Stonhard in my basement which I'm in the process of finishing. Curious if anyone has done this to their basement floor? Pics? Looking for some design/color ideas.
 

lmcgrew79

Viper Owner
Joined
Jul 20, 2011
Posts
231
Reaction score
0
Location
Hurricane, WV
Not sure of stonhard, but the all out best would be a slurry quarts system. Stonhard may be just that, we use tnemec or general polymers for those. Same deal you hit it with a hammer and the concrete will break or come up first. Those start getting extremly expensive for a garage system also. If money is no object polished concrete would be even better because there are no coating to fail. It just ground down with different diamond grinding grits till its burnished/polished. Different colors come with what ever acetone stain you like.
 

bluesrt

Enthusiast
Joined
Nov 17, 2008
Posts
5,011
Reaction score
3
I used VCT Tile (1350 SF) It has held up well after I waxed it. It is really cheap in the grand scheme of things and come in a ton of colors. Here are some pics of my place where I keep the snakes.
You must be registered for see images attach
You must be registered for see images attach
i have the same and lov it also-
 

Members online

Forum statistics

Threads
153,139
Posts
1,681,566
Members
17,640
Latest member
SDViper
Top