RT10 hardtop market

aviatorone

Enthusiast
Joined
Apr 3, 2011
Posts
231
Reaction score
0
Location
*******, GA
I like it, I can't wait to see the finished product......get busy! : )

What I liked about the AF tops, were the A pillars and the 4 extra inches of side window height. It looked like a non removeable double bubble hard top!

I hope this one will have that extra side window space... Good luck!!
 
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
Help wanted... I need a volunteer with a second Gen Rt10 that would be willing to let Steve and I do some test fitment with the new top due to a few minor differences between the generations. We are hoping for someone as close to Holland MI as possible. It will be soon so send me a PM or just post on here. someone start the ball rolling...
thanks
J
 

Zee

Viper Owner
Joined
Nov 12, 2012
Posts
301
Reaction score
0
Help wanted... I need a volunteer with a second Gen Rt10 that would be willing to let Steve and I do some test fitment with the new top due to a few minor differences between the generations. We are hoping for someone as close to Holland MI as possible. It will be soon so send me a PM or just post on here. someone start the ball rolling...
thanks
J

I'd love to help but I am in CA :(

Let me know if I can help in any way
 

Rapps

Viper Owner
Joined
Sep 15, 2009
Posts
110
Reaction score
0
Location
Michigan
Evening J
Your looking for Gen 2 correct?
We have a Gen 1 and would love to get a better top. The items we'd like are:
good looking, NO leaking, no squeaking (AF don't leak according to owners, but they have noise at the rear pins) windows that open (more than the cloth zip open a small space) and the ability to take it on a trip to keep dry/sun from baking you on long trips but then remove it at will.
Thanks for the efforts. I've been pushing to buy an AutoForm after getting wet enough times. But a new/improved product that won't break the bank is worth waiting for.

Help wanted... I need a volunteer with a second Gen Rt10 that would be willing to let Steve and I do some test fitment with the new top due to a few minor differences between the generations. We are hoping for someone as close to Holland MI as possible. It will be soon so send me a PM or just post on here. someone start the ball rolling...
thanks
J
 
Last edited:
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
Thanks Zee and Ataim.. are there any gen 2's in Michigan? Not everyone at once... :) I realize its winter hibernation time but I need to get this done so its ready before spring... thanks
J
 

GotAViper

Enthusiast
Joined
May 5, 2005
Posts
808
Reaction score
0
Location
Annapolis,MD
Based on the pictures...does the top sit on top of the sports bar? I was hoping for a flush mount / 3 peice top.
 

kickinasp

Enthusiast
Joined
Jan 30, 2003
Posts
92
Reaction score
0
Location
USA
We have a member (MCVO) in Grand Rapids with a Gen II R/T. With winter etc., maybe not a far drive for you? I will PM his contact number.
 
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
It's a darn good thing Steve is on this project. Again pics will do the talking here. We have our Gen 2 test coming up soon followed by final mold work, windows and then production begins. .. be ready by spring my friends.. once again.. feedback is appreciated.. thanks everyone..
You must be registered for see images attach
You must be registered for see images attach
 

Attachments

  • 100MEDIA36IMAG0126.jpg
    100MEDIA36IMAG0126.jpg
    90.1 KB · Views: 210

mattdillon

Enthusiast
Joined
Oct 10, 2010
Posts
1,520
Reaction score
0
Location
Duck Dynasty Back Yard
Based on the pictures...does the top sit on top of the sports bar? I was hoping for a flush mount / 3 peice top.
That is WHY I've Always Favored the Lemke Top is because its the ONLY one I've Ever Seen that IS Flush On the Front & Rear of the Top! To ME, this one here Still looks like its just Sitting on Top of the car (still looks like a toupee, but not quite as Bad as the OEM one) Not to Mention, the Lemke IS A 3-Piece! I FINALLY Got Mine In (After 5 Months) its now at my body shop guy getting fitted, sanded (had a few bad spots on it that needed to be touched up) & painted, ! JMO!
 

1VprTony

Enthusiast
Joined
Apr 3, 2011
Posts
17
Reaction score
0
Location
OH
Looks great! ... standing by for pricing and when i can order one :eater:
 
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
That is WHY I've Always Favored the Lemke Top is because its the ONLY one I've Ever Seen that IS Flush On the Front & Rear of the Top! To ME, this one here Still looks like its just Sitting on Top of the car (still looks like a toupee, but not quite as Bad as the OEM one) Not to Mention, the Lemke IS A 3-Piece! I FINALLY Got Mine In (After 5 Months) its now at my body shop guy getting fitted, sanded (had a few bad spots on it that needed to be touched up) & painted, ! JMO!


My first "hater". Awesome :2tu:. everyone has they're own opinion.. that's what's awesome about all the different top options from everyone. I am happy to be a part of it all. Three quick things... I am over the average male height.. Lemke won't work for anyone that has been blessed (or cursed) with my height, not to mention its already been done... I never said this isn't a 3 piece.. and there may be something wrong with your shift key or caps lock. :smirk: Just curious.. how much do you have into your top with purchasing, fitting, sanding and paint repairs.. I'm still working on pricing.. you can pm me if you want.. I honestly do appreciate the feedback. Thank you
J
 
Last edited:

Zee

Viper Owner
Joined
Nov 12, 2012
Posts
301
Reaction score
0
My first "hater".. everyone has they're own opinion.. that's what's awesome about all the different top options from everyone. I am happy to be a part of it all. Three quick things... I am over the average male height.. lemke won't work for anyone that has been blessed with my height.. I never said this isn't a 3 piece.. and there may be something wrong with your shift key or caps lock. just curious.. how much do you have into your top with purchasing, fitting, sanding and paint repairs.. I'm still working on pricing.. you can pm me if you want.. I honestly do appreciate the feedback. thank you
J

I really hope it's a 3 piece that fits in the trunk and affordable.
Patiently waiting for the good news :eater:
 
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
going a little ways back in my posts.. like the very first one I think I mentioned my goal was an affordable hardtop and I would follow shortly thereafter with a 3 piece trunk stowable one if I could. I also mentioned the price of a 3 piece would be higher due to all the extra work. Thanks to AF the timetable has improved exponentially... and I really have no plans to deviate from my original goals with one exception.. original idea of carbon fiber has to be sacrificed for cost reasons.. keep watching. I may have another less cryptic update after sunrise here in Michigan.
 
Last edited:

10PISTNZ

Enthusiast
Joined
Jun 3, 2012
Posts
79
Reaction score
0
Also patiently waiting for the three piece trunk version. Like the way you followed the curved look of the body. Although I like the Lemke top, I too would appreciate more headroom.
Hoping that the top mounts easy and maybe even a scoop version.
 
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
You must be registered for see images attach
You must be registered for see images attach


Couple different shots.
there is an a pillar piece.. just not on these pics.
 
Last edited:

1VprTony

Enthusiast
Joined
Apr 3, 2011
Posts
17
Reaction score
0
Location
OH
there is an a pillar piece.. just not on theses pics.

If its like the current AF top with a pillars that right there would make me lose interest, not to mention it wouldn't work so well for a 3-piece design. Just is too awkward for one person to move around and store off the car. Just my $.02 ...would still love to buy one exactly like the idea in post #19
 
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
If its like the current AF top with a pillars that right there would make me lose interest, not to mention it wouldn't work so well for a 3-piece design. Just is too awkward for one person to move around and store off the car. Just my $.02 ...would still love to buy one exactly like the idea in post #19

No its not at all like the normal AF top, you'll see soon.. its staying right with the plan of post 19. You'll be able to see shortly and I think you will like it.
 
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
Ok.. pretty straight forward now with the info. .our plans are to make this top work as a one piece top first...it will work with both the Gen I and Gen II. The design and shape of this top has been modeled specifically to insure that we can offer this same shape top with the ability to be sectioned into three pieces which will allow you to store sections in the trunk. This however will not be available until a later date based on other upcoming New products that are in the works at AF. We will be offering this top in black gel coat, with all necessary hardware and weatherstipping . Our target is for the GenII tops to be under $1000 and the GenI with windows to be under $1900. We will offer these tops painted as well, but will not be able to release that price until a later date. Yeah ... that's right .. 1000 and 1900.. with windows .. that's less than the original estimate I had... how often does that happen?
 
Last edited:

1VprTony

Enthusiast
Joined
Apr 3, 2011
Posts
17
Reaction score
0
Location
OH
No its not at all like the normal AF top, you'll see soon.. its staying right with the plan of post 19. You'll be able to see shortly and I think you will like it.

:2tu: Thank you! ...patiently (but eagerly) waiting
 

Zee

Viper Owner
Joined
Nov 12, 2012
Posts
301
Reaction score
0
Ok.. pretty straight forward now with the info. .our plans are to make this top work as a one piece top first...it will work with both the Gen I and Gen II. The design and shape of this top has been modeled specifically to insure that we can offer this same shape top with the ability to be sectioned into three pieces which will allow you to store sections in the trunk. This however will not be available until a later date based on other upcoming New products that are in the works at AF. We will be offering this top in black gel coat, with all necessary hardware and weatherstipping . Our target is for the GenII tops to be under $1000 and the GenI with windows to be under $1900. We will offer these tops painted as well, but will not be able to release that price until a later date. Yeah ... that's right .. 1000 and 1900.. with windows .. that's less than the original estimate I had... how often does that happen?

That is awesome!! Since your not doing carbon fiber, what is the estimated weight of the top? Similar to factory?
 

sfm79

Enthusiast
Joined
Jun 10, 2011
Posts
337
Reaction score
0
Location
Macomb MI
Great pricing. A big concern for most Gen1 buyers will be how water proof it will be. AF top have a good reputation for sealing tight with out leaks. Have you established a web site for these yet or will they be sold through AF?
 

Autoformsteve

Viper Owner
Joined
Oct 27, 2004
Posts
192
Reaction score
0
Location
Holland, Mi
3rd shift J is sleeping...factory top is 35lbs...I just weighed the prototype...it's 24lbs without latches. AF Steve
 

Autoformsteve

Viper Owner
Joined
Oct 27, 2004
Posts
192
Reaction score
0
Location
Holland, Mi
Same Autoform quality and style. Sealing will not be an issue due to the way it clads over the sport cap...latches will be simple, strong and easy to use. Front latches will be tunable for both Gens. Plans are for the tops will be manufactured at Autoform and ship from our facility here in West Michigan.
 

Zee

Viper Owner
Joined
Nov 12, 2012
Posts
301
Reaction score
0
3rd shift J is sleeping...factory top is 35lbs...I just weighed the prototype...it's 24lbs without latches. AF Steve

Thanks Steve. I still have my heart set in a 3 piece so I can store in the trunk. I know your still developing the 1 piece but any timeline or price estimates for the 3 piece?
 

Autoformsteve

Viper Owner
Joined
Oct 27, 2004
Posts
192
Reaction score
0
Location
Holland, Mi
We will try to work on it this summer... maybe something by fall...price??? I'll try not to double the price...but making a top come apart adds tooling, fixture, hardware and labor costs. I have been thinking about doing this for a long time...timing needs to be right and I need to make sure there is a solid market. A lot has changed in the GenI Viper world since I created the first hardtop in 93. Jeff has done a great job with his top and I know he has a certain look and following. I have no reason to copy his design and engineering. I have a different idea on what the Viper should look like with a top on and how to make it affordable, easy to install and remove the pieces and still offer the headroom and egress needed for us tall guys. BTW it will work with our roll bar as well
 
OP
OP
J

Jmch

Viper Owner
Joined
Sep 13, 2012
Posts
149
Reaction score
0
see I told ya he was real.. :) I just want to reiterate his point that we aren't out to make something you can already buy. From my original post it has always been about doing this from a fresh new vantage point. As fortune would have it when we met we realized our individual ideas were nearly identical. My very first pic long before Steve was in on it was of the route I was going with the double bubble.. just reborn into something new. While the design has evolved aestheticly we have stayed true to our core concept. I am grateful to not just Steve and Autoform but a whole list of people who graciously helped me right from the beginning weather it was extra latches from Roy in Illinois or John in Rhode Island shipping me an entire roof.. every little bit helps. Stay with us just a little longer and the first single piece tops will be rollin' out. ... and at the price target we announced i think we met the affordability goal as well..
thanks for watching
J
 
Last edited:

Forum statistics

Threads
153,139
Posts
1,681,565
Members
17,640
Latest member
SDViper
Top