M
maverickagm
- Posts
- 96
- Reaction score
- 49
Latest activity Postings About
-
-
Mmaverickagm replied to the thread 99 RT/10 power steering reservoir cap.Dorman 82585 I would also suggest routing a hose from the cap vent to anywhere pointing down and away from the headers...
-
Mmaverickagm replied to the thread Gen 1 Differential Fluid Change.I don't think Gen 2 has drain plugs from factory. That's what some threads seemed to indicate when I was searching for the thread size...
-
-
Mmaverickagm replied to the thread Gen 1 Differential Fluid Change.Update: It is a 3/4-16 UNF plug, otherwise known as an 8AN ORB (o-ring boss) plug. I ordered an aluminum one and torqued it to 15ft/lbs...
-
MA bit of advice, before you drain any transmission, differential, transfer case, make sure you loosen the fill plug first, I can't tell...
-
Mmaverickagm replied to the thread Gen 1 Differential Fluid Change.Does anyone know the drain plug socket size? A 1 inch box-end wrench feels a tad loose. I suspect it might be 25mm (1 inch = 25.4mm)...
-
MFor those wondering, the quickjack 7000TL works on a Gen 1 Viper. Notes: * Mine is stock ride height. * I did not have to drive onto...
-
-
Mmaverickagm replied to the thread Amsoil 75w90 good for late model Gen2 transmissions?.I feel like I read every post today trying to decide on fluid for my 1993 t56. The service manual calls for dexron IIe. My understanding...
-
MI don't want to hijack this thread, only add that many times, in my experience of working on these cars for about thirty years, the idle...
-
Mmaverickagm reacted to David Buchesky's post in the thread Coolant in between intake runners with
Like.
The Gen 1's often leaked at the joint of the crossover for the thermostat where it connected to the cylinder heads. Later cars had an... -
Mmaverickagm replied to the thread How to replace the Gen 1 Clutch Pedal Bushings.In my case, I did not have squeaks. I only had excessive lateral play.
-
Mmaverickagm replied to the thread Easy way to replace clutch pedal bushing..I recreated these instructions as well as I could here...
-
Mmaverickagm replied to the thread How to replace the Gen 1 Clutch Pedal Bushings.8) Replace the two Pedal shaft bushings. Grease them up. 9) If you're using a replacement birdcage bushing, grease it up. Don't put it...
-
-
Mmaverickagm posted the thread How to replace the Gen 1 Clutch Pedal Bushings in RT/10 and GTS Discussions.The problem: My mechanic told me I needed a new clutch safety switch. I did not. The actual problem is the clutch pedal has some...
-
-
MMy first guess would be that it won't spy on you when it's done. My second guess would be that communist BCM's tend to try and take...
-
-
Loading…
-
Loading…
