GTS Dean's latest activity
-
GTS Dean reacted to 99RT10GTS's post in the thread new to me 2000 GTS overheating within minutes. with
Like.
I have Billet rebuilds. G1/2/3. Message sent -
GTS Dean replied to the thread new to me 2000 GTS overheating within minutes..Any of the usual suspects.
-
GTS Dean replied to the thread new to me 2000 GTS overheating within minutes..If you look more closely, you'll see that I did in fact clean both the radiator and condenser.
-
GTS Dean replied to the thread My Viper continues to hate me.Dang I've never seen that before. Time for a new-used wishbone and have a close look at the knuckle.
-
GTS Dean replied to the thread new to me 2000 GTS overheating within minutes..That's not dirty. This was mine after about 8-10 years of road and track use. I held the radiator flat about 1-2" off the floor and just...
-
-
I can program all year JTEC PCM's for a gear change and supporting mods so you don't need to use the yellow box. PM me if interested.
-
GTS Dean replied to the thread new to me 2000 GTS overheating within minutes..Squeeze hard o n the upper radiator hose with a glove or shop rag for insulation. That's some NASTY looking whatever in your system...
-
GTS Dean reacted to Viper Specialty's post in the thread new to me 2000 GTS overheating within minutes. with Like.
Skip the waterless coolant and hose nonsense for now. You need to figure out "what is hot, and what is not". None of your temp readings...
-
GTS Dean reacted to daveg's post in the thread new to me 2000 GTS overheating within minutes. with Like.
Dean, I have the exact same unit and love it. Not only does it do a great job purging but there is no mess in the process!!!
-
GTS Dean reacted to daveg's post in the thread new to me 2000 GTS overheating within minutes. with Like.
None of the Pics you showed indicated the Motor was running at that temp. Shoot at the base of the thermostat housing.
-
GTS Dean replied to the thread new to me 2000 GTS overheating within minutes..I put a new NAPA t-stat in my car a few years ago and it had a bleed orifice already installed. It allows for efficient cold fill...
-
-
GTS Dean reacted to ISMarco's post in the thread Loose harmonic balancer AND crank pulley with Like.
Good catch! The pulley bolt torque spec is super high, ~250 ft*lb. But unfortunately they still come loose. I feel like this problem...
-
Clogged/bad catalytic converter. Maybe $7k with used parts. G3 hoods are plentiful and cheap, $500? Sill and fender $3k Hopefully...
-
Correct. Do you have a Service Manual? I am selling one. It spells it out nicely, but not hard. After getting all(hidden ones too), it...
-
GTS Dean replied to the thread Aftermarket Proportioning Valve Install Question.Both circuits get full pressure for the initial application. Above a certain relief pressure, the rears build proportionately less than...
