GTS Dean's latest activity
-
GTS Dean reacted to Steve-Indy's post in the thread New to me gen 2 RT/10 missing air bag fuses. with
Like.
Several years ago, a solid guy with many Vipers, Prowlers, etc. stated the through his long multi-vehicle collecting history he did... -
GTS Dean reacted to Walter Clark's post in the thread Older GEN VIPER? This happens! Wiring with Like.
Yep. I found the connector pins for the radiator fan motor, where they run through the passenger side footwell on mine were overheating...
-
For months, I'd been fighting a very hard-to-find problem on my 1994 Gen 1. Symptoms were erratic idle, very high idle, check engine...
-
GTS Dean replied to the thread Differential fluid and modifier.I'm using Valvoline 75W-140 synthetic in the handy squeeze bag. It already has the friction modifier in it. Our diffs don't hold a lot...
-
GTS Dean replied to the thread Door panel retainers.NAPA carries a wide selection of panel fasteners. Hopefully you have an old one to compare to.
-
GTS Dean replied to the thread Comprehensive Exhaust Video.Exactly.
-
GTS Dean reacted to VipeRob's post in the thread Bleeding slave after Clutch/ Slave install with Like.
I got so frustrated with being unable to bleed mine after a master replacement that I let it sit for a month. Got in to fire it up and...
-
GTS Dean reacted to Steve M's post in the thread Bleeding slave after Clutch/ Slave install with Like.
From personal experience, it's allowed me to hook up a pressure bleeder to the reservoir and force the air through the system to the...
-
GTS Dean replied to the thread Power Steering Cap Fix.Cooler, pump and lines probably hold 2/3 of the system capacity. The left and right sides of the rack tube account for the balance. I...
-
I have a set of fuel rails for a Gen 3 for sale. They are -12 AN fittings, made by Prefix, anodized blue, and custom made for my high...
-
Someone in this thread told me I didn’t need a resevoir and my cap was only overflowing because I had trans fluid in the system. I...
-
GTS Dean replied to the thread Power steering reservoir cap ?.Mid-'90s Jeep Grand Cherokee used the same reservoir & cap.
-
GTS Dean reacted to Steve M's post in the thread Bleeding slave after Clutch/ Slave install with Like.
During the slave/tranny R&R is when you would have wanted to install a remote bleeder...it makes a world of difference.
-
Wow you have really dug into that project, nice work! I found all it takes to get the left side to work on the right is remove the nuts...
-
GTS Dean replied to the thread Dealer tools.I have a DRB and Gen 1-3 Service Tools, plus ball joint and tie rod end separators.
