Recent content by trackpak

  1. T

    Need help with 2008 ACR rotors

    I took off right front rotor and lightly steel willed the brake material off and found another gouge on the rotor. So I ordered another set of rings from th Motorsports $516 shipped. Rear set fit Perfectly
  2. T

    Need help with 2008 ACR rotors

    First foot shos inside of right front rotor where a deposit can be seen. I'd to try and clean it off and inspect pads, anyone have a suggestion on how to clean with what? The material looked like brake pad deposit and coils be slightly removed with hard finger nail pressure. The second foto...
  3. T

    Need help with 2008 ACR rotors

    Never mind I found the Allen and 15 mm bolt. E pads and full pads look good. Anyone know the torque settings?
  4. T

    Need help with 2008 ACR rotors

    Need to remove e brake on rears anyone have a photo of where fasteners are and sizes?
  5. T

    Need help with 2008 ACR rotors

    anyone have some fotos and descriptions if I wanna remove the pads w/o the rotors? includ the tool sizes and Tq #s if u know them thx
  6. T

    Need help with 2008 ACR rotors

    thx for offer but rings are only $516/pair shipped and !.5-2 hr per end of work
  7. T

    Need help with 2008 ACR rotors

    Thx for all the replies. I finally found out from stoptech that these rings are the same as the generic 355 x 32 slotted Aero Rotors that I use on my z06. I've changed the rings 4-5 times and get about 10 track days out of the fronts. The car was hit on right side and that may have caused the...
  8. T

    Need help with 2008 ACR rotors

    had a brake pedal vibration in my 2008 (car had accident and prolonged down time) on moderate-light street driving. Car has had 1 rack day 3 yrs ago. with car on lift it was shown to have a right rear interior gouge on rotor surface (so I'm thinking it needs a pair of rotors on rear). Is the...
  9. T

    transmission help

    sounds like synchros
  10. T

    Do I need sensors on my track wheels?

    what's the best vendor to get the extra whell sensors from and what is a good price 4 a set of 4?
  11. T

    Do I need sensors on my track wheels?

    Have an '08 acr and want to get some Hoosiers on another set of wheels do i need to buy sensors for normal function? Can i buy 18" wheels or use the competition coupe stock BBS wheels on my 08 acr? anyone know how to chg the brembo caliper pads? thanks guys
  12. T

    Gen4 owners advice

    should oil be checked cold or hot? where should level be for a track day (advanced HPDE driver)? have an '08 acr w/ chasis setup by primetime race group. 1750 miles now. thanks---Steve PS I'll need to chg brake pads for the track day and see that the brembos may require a punch to tap out...
  13. T

    Moton mounting 101 for Gen4

    would you switch to motons from the acr coil overs for track day activity?
  14. T

    Belangers on ACR - check.

    cross over or crossover delete? any difference in power?
  15. T

    Belangers on ACR - check.

    How's the drone? what's the best place (and at what price) for buying the headers and exhaust? any guys have trouble with codes? or check engine lights? can we get a discounts with club membership?
See more

Latest posts

Members online

Total: 785 (members: 5, guests: 780)

Forum statistics

Threads
153,199
Posts
1,681,914
Members
17,696
Latest member
Viper123456

Share this page

Top