Search results

  1. J

    My Viper was STOLEN.

    I don't know what to say, I just that I hope gets what he deserves and you get fairly compensated for such a beautful car and all your hard work.
  2. J

    Relocating O2 sensors to merge collector - where? (pic)

    My O2's are mounted in the forward most tube of the flange, so they are only reading the front three cylinders. They are at the 10 o'clock position (looking from the side of the car). Your thread on reaming out the sensors did away with thowing codes. :2tu: My wideband is mounted where your...
  3. J

    Selling my '97 B/W GTS

    From the photos it looks like a good deal to me. Good luck with the sale. I passed the link on to a friend who might be interested.
  4. J

    Neat Lift! Anyone have any experience?

    Thanks Ron! It's an SP-7, similiar to the SP-7x but WAY shorter. I just took the ramps off. They don't make the SP-7 model anymore. This video shows the difference between the two....
  5. J

    Neat Lift! Anyone have any experience?

    Go the flush mount route.......This is a BendPak. Just mark around the footprint of the lift, call a concrete sawing contractor, bust up the concrete with a sledge hammer so it's in managable pieces, excavate some of the AB (that's aggregate base not our friend Adam!), level the excavation with...
  6. J

    PICTURE someone did for me..

    WOW!, those are incredible!
  7. J

    ALL MOTOR BUILD!!(Pics)

    I guess I didn't know better. My apologies!:crazy2:
  8. J

    ALL MOTOR BUILD!!(Pics)

    Hey Adam, if I didn't know better, I'd say you took those photos with a certain someones D300!!!:D
  9. J

    Do I need to change the air in my tires so my car will run faster

    Yes you should change the air in your tires on a regular basis. I use helium which reduces the unsprung weight by about 5 pounds per tire.
  10. J

    My knob is getting sticking

    Well that explains why my right arm is so much bigger than my left...... Yep, no denial here!!!:)
  11. J

    Update on drilling O2 sensors and wire heat shielding

    Dave, thanks a bunch for posting this thread.:2tu: I have been throwing heater codes for a while now and by opening up the holes on the sensors......no more codes.:headbang:
  12. J

    Thanx again to DLM for my car....after 2 months or so i guess.

    Mine great, thanks for asking. And now it's finally cooling down enough to acutally drive it at times other than 6:00 am.
  13. J

    Thanx again to DLM for my car....after 2 months or so i guess.

    Glad to hear it Phil!!!:drive:Yep, the pull of those DLM monsters boggles the mind.:omg: Did you go with the DLM air/water intercooler instead of the huge air/air?
  14. J

    10.3 at 131mph pics

    Very cool Nadine! As your velocity increases, drag from wind resistance increases as the square of the velocity. So, yes your times were hurt big time from the wind. You did make some great runs though!:drive:
  15. J

    feeling a "grinding" after putting on new ebc red pads

    I'm with Dave on his third guess. Or maybe a pad\s was put in backwords???
  16. J

    $600 Nail

    I've used these before when some A-hole put nails under my tires at a motel.:evilmad: The nails were all right in the center of the tires. If they were near the edge I would have replaced the tires. ///MZ3.Net - Z Rated Tire Patch-Plug
  17. J

    Looking for a few Yellow GTS's

    Good info. I think I'll go the route 1000.vipers recommends. Eventhough they won't be identical, they will be much cheaper and kids would probably like them just the same.
  18. J

    Looking for a few Yellow GTS's

    I've done some searching around and can't seem to find any little Matchbox size solid yellow GTS's. Forgive my ignorance, but I don't know what scale they call those little cars that are about 2.5 inches long. Just wanted to have a few to carry around for little kids that admire my...
  19. J

    How to Repair Curb Rash

    Thanks slaughterj, I don't see any reason why it wouldn't work on gen3 wheels as I have used it on gen2 wheels. The surface conditioning discs are made by 3M (the discs are refered to as roloc) and come in varoious diameters and grades. Brown=coarse Red=medium Blue=fine I used medium and...
  20. J

    How to Repair Curb Rash

    Thanks for the compliments.:) I was really easy, even a monkey could do it.:mf: Just take your time, feather out the deep spots, and occasionally touchup a few spots that you either got over zealous with or didn't get smooth enough the first time. It really pissed me off though because I'm...
  21. J

    Questions about Spark Plugs

    I don't know about the NGKs # 4554's, but these are the BKR7E-11 plugs....
  22. J

    How to Repair Curb Rash

    I scratched the right rear last weekend as you can see by the debris left on the tire, so it was time to fix it. Start with various grades of surface conditioners, a dremel and coarse and fine buffing compound.... I started with the least aggrresive surface conditioner, but had to use a...
  23. J

    Questions about Spark Plugs

    I'm running a DLM SC setup, about 12 psi, ported heads, cam headers, etc.... Doug recommended a NGK BKR7E-11 plug (2 steps colder than stock) gapped at 0.034-0.035 and they perform great. One question is why does the NGK website recommends 0.044 gap...
  24. J

    Serious Vibration In The Rain

    Wouldn't the centrifugal force from the rotation of the wheel make the water in the channel actually balance the wheel? Why do you think it would "puddle" in one location? Maybe I don't understand what you are trying to say?
  25. J

    Caption contest again!

    <passenger> Gee, I know where Chad's right hand is, and maybe the people taking the picture know too. I better hide!!!:omg:

Latest posts

Members online

Total: 1,020 (members: 12, guests: 1,008)

Forum statistics

Threads
153,836
Posts
1,686,658
Members
18,447
Latest member
naimsito

Share this page

Top