Search results

  1. V

    valve springs

    My heads don't have Jeff's stamp on them, so it doesn't look like the failure was on a striker. I think you're right about changing all of the springs, but I'm not sure which ones to get. Summit Racing said it depended on my cam, which I don't know the specifications(former SVS car.) I'd sure...
  2. V

    valve springs

    This is the kind of support and generosity that makes me love this forum. :brick: I am getting some help from Jeff at Striker. Pointing me toward Greg is also going to be useful in the future. Thanks, Guys.
  3. V

    valve springs

    Does anyone know what valve springs are used on Stryker heads? I'm pretty sure my heads are not stock, and I remember the name Stryker. I have two broken springs that need replaced. Can I buy just a couple? I don't think there's been any damage to the valves, but I guess I won't know until I...
  4. V

    looking for a used HANS

    I think used HANS are going to be hard to come by. The prices have dropped alot over the past couple of years. Look at Saferacer.com; I remember seeing some advertised for under $600.
  5. V

    Gas Pedal fell off!

    I turned the plastic housing over so I could insert the pin from left to right. I think most pressure on the pedal would be in a left to right direction, esp if heel/toeing. I took the pin to Lowes and found a cap that tapped onto the end of the pin. So far so good. I also picked up some C...
  6. V

    Good price on M1 5W-40 at Wal Mart

    Save an extra $10 with a rebate: SlickDeals.net Forums - View Single Post - Mobil 1 $10 Rebate :2tu:
  7. V

    I need a New Key!!! Mine broke!!! Anyone selling any blanks?

    I just drilled a hole thru mine. I'm not so worried about the appearance of the KEY.
  8. V

    09 ZR1, didn't buy it!

    I LIKE the fact that my Corvette blends in so well. I don't want to attract attention to myself when driving on the street. I prefer to be anonymous. I drive my Viper exclusively on the racetrack. It better perform well there, because everyone expects it to. No point in street racing or bench...
  9. V

    Summit Point

    Nice write up. It was such a hot weekend, my temps were over 200, too. I didn't look at the gauge for too long, so I don't know the exact temp. I flushed the coolant and replaced it w/ water and water wetter this week. Try not to give the Ferrari so much of a headstart next time. He had time...
  10. V

    Summit Point

    Hey Frank, There is a picture of you chasing down the Ferrari at SP. Pretty good, considering all the traffic you had to negotiate. See if this link works: Turn 10 imaging- powered by SmugMug
  11. V

    feeding the snake?

    It is a '96. I'm not sure of the brand of the top, but here's another pic: I liked the first picture b/c the P-car kinda looks like Mr. Bill if you squint at it. "Oh No!" Hey Juli, I don't know if they'll let me attend VCA events since my car isn't street legal. I'd have to attend in my...
  12. V

    feeding the snake?

    Is this the proper diet for my Viper? How many should I feed it, and how often?
  13. V

    master cylinder

    For anyone interested, it looks like it is a 3/8" banjo bolt. I pulled the bolt and took it to Lowes and put it in their sizing moulds.
  14. V

    master cylinder

    I'd like to install a pressure sensitive switch for my brake lights on my '96 race car. OE equipment is gone/ never saw it. I don't know if my master cylinders are original. They are Lockheed CP2293. I need to know the size of the banjo bolt that connects to my brake line. A 9/16 wrench fits it...
  15. V

    shift light

    Can a shift light be added to the factory tachometer? Any DIY tips? I'm not used to the tach location yet. A shift light could help me keep my eyes on the race track and not over-rev.
  16. V

    ? for northeast guys

    I have instructed at this event for a few years, usually w/ the Corvette club. I have already received an offer to instruct for them this year. I might rather instruct a Viper student. With which club will most Vipers register, and what is their instructor protocol?
  17. V

    ? for northeast guys

    I know Memorial Day is reserved for Vipers, Ferrari, Corvette, Lambo's, and Maserati. Full course, w/ turn thru infield right after the tunnel turn. More info later.
  18. V

    Viper done blowed up!! Help!!!

    Hey Aries, How did your situation work out? I thought about taking my Viper to the dyno @ AR, but they always tried to sell me their own electronics/tuning stuff when I was there in the past. I know they can build imports, but are you happy w/ how the Viper turned out?
  19. V

    WTB DE/Race Car..

    I'll send a pm to you about a car.
  20. V

    year clarification

    Yeah, It's me, Frank. You and I read the same forums. I find specific car forums to be better sources of information than any other place. I tend to have lots of questions and use the "search" feature. I try to learn from others and hope they can learn from me. You may know more about my car...
  21. V

    VIR Dec 6-7

    Nate, CHIN holds events that provide lots of seat time. No competition. They usually require point-bys for passing. There are usually a full spectrum of cars participating; some are quite fast and exotic. I chose them over the NASA event b/c it is a shorter drive for me and the size of the field...
  22. V

    year clarification

    My car is white but it has aftermarket parts so I'm not sure what is stock and what isn't. The original stripes do come to a point on the front fascia. It has sidepipes, but I think they could have been added along w/ the headers. The original wheels are 5 spoke, also white. The magazine...
  23. V

    VIR Dec 6-7

    I'm going to the CHIN event @ VIR in early December to get a feel for the car. Is anyone else from the forum going to be there in a Viper?
  24. V

    year clarification

    I recently got a 1996 RT10. Some VIPER magazines came w/ the car. One article stated that no convertibles were made in 1996 b/c of a change in assembly plants. So is my car a 1995 badged as a '96, or is it really a '96 in the eyes of the VCA? The code on the title is for '96.
  25. V

    accusump pressure/question

    Mine is a brass BOV w/ a ring thru it. But I'll check out those pics, too.

Latest posts

Staff online

Members online

Total: 947 (members: 12, guests: 935)

Forum statistics

Threads
153,841
Posts
1,686,686
Members
18,454
Latest member
Mopar SRT

Share this page

Top