Search results

  1. 9

    FIRST LOOK AT NEW 3D MGW GRIPPER KNOB>>>>>

    I would love to see one in Cognac! :headbang:
  2. 9

    Rich's Shifter Parts ????

    Re: Rich\'s Shifter Parts ???? [email protected] That's the address I used to get my bad boy adapter! Best 25 bucks I ever spent on the Viper! :headbang:
  3. 9

    Did Kumho come out with 18s

    Need to find out shipping rates. :-( This is a response I got from Kumho rep inquiring about 18" availability in North America.. "Unfortunately we do not have plans to import the size you are looking to the North American market. these tires are produced in low volume, so Europe gets all...
  4. 9

    Almost killed myself today

    I've done this too!! But never happens when I shift "slowly".. How often does this happen in the 1/4??!!
  5. 9

    Show me (or tell me) what aftermarket stereo headunit you have

    With my top off I just turned off the stereo on the highway. It just wasn't worth it with the stock deck. So I spent one whole weekend ripping it all out and installing a 50x4 Sony deck. It was a pain in the a$$ to re-run RCA cables to the trunk but WELL worth it. So now I have the new...
  6. 9

    Mixing tire types front/rear?

    Are Kumho's available in 18" rear yet?
  7. 9

    Online source for stock spark plug wires?

    that's a good deal. Thanks for the tip!
  8. 9

    Online source for stock spark plug wires?

    I've done a search and finally decided that I would like to replace my spark plug wires with factory ones. Where is the best "online" source to get replacements? I was changing the plugs and saw how bad a shape my wires are in so have decided to replace them.
  9. 9

    Rich Detert short shifter install problem

    3/4" crowsfoot saved the day!! Using the "foot" made the install easy. Love the way the 3" shaft feels now! Doesn't feel like I'm shifting a truck anymore. Best 25 bucks I ever spent for the Snake!
  10. 9

    Need advice on GenII audio system

    I tried one of those 6W0's in my RT/10 and it just didn't have enough "thump" for me. It does have decent bass for its size (as long as you enclose it right). I ditched it and went for a ghetto bass box in the passenger footwell area. (10 inch solobaric) :headbang:
  11. 9

    Rich Detert short shifter install problem

    First gear was the only angle I could get at the bolt. However, in my case, there isn't enough room to turn the wrench because of the position the wrench is in. I think I'll try a crows foot and go from there.
  12. 9

    Rich Detert short shifter install problem

    OMG! That's discouraging!!! Anybody else out there care to share how they got their GenII stock shifter off for the Rich install?
  13. 9

    Rich Detert short shifter install problem

    Ok cool.. Just making sure I was tackling the right bolt. The 19mm seems a little big and the 17mm seemed a little small. Would that stock bolt happen to be 18mm?
  14. 9

    Rich Detert short shifter install problem

    I cannot for the life of me get the stock shaft off. The stock knob and it's "immediate" shaft comes off with no problem. I've removed the whole center panel and to get to the 19mm bolt requires an almost impossible angle to get to. I have a Generation two and it seems that his website...
  15. 9

    blew my top...

    Same thing happened to me. In my case, both latches were on the "side" of the thingie they were supposed to latch around. Addjusted it and everything is fine now...
  16. 9

    Ran into an RT/10...

    Yup, I remember that "Married with Children" episode. I wish that I could see it again!
  17. 9

    Video-Idiot viper almost causing carnage!!!

    Nice car... Stupid driver. He is SOOOOOO lucky. I know that he had to have learned his lesson and will probably have a lot more respect for the car from that point on..
  18. 9

    DIY Hoist for RT/10 Hard Top

    Shucks! Oh well.. Seems simple enough. I think I'll design and tackle one myself. Thanks for the info! :)
  19. 9

    Wimpy little stereo...

    Now that is awesome! :2tu:
  20. 9

    Wimpy little stereo...

    Makes sense.. Never messed with fiberglass before. Anybody out there pay to have it done at a shop? I wouldn't think that it should empty my wallet too much would it? Remember, not ALL Viper owners are loaded with cash. :p
  21. 9

    DIY Hoist for RT/10 Hard Top

    Thanks! That's similar to what I had in mind. Was that easy to do?
  22. 9

    Wimpy little stereo...

    I installed a JL 6wo speaker and it sounds like crap. How did you "enclose" the back of yours? Fiberglass? :confused:
  23. 9

    Fast and Furious Japanese Import Gets Venomous Bite

    That's just scary. Imagine if that POS would have wrecked into your Viper. No matter how much I'm tempted to, I try my hardest not to fall for the bait from all these young "racers" trying to see what the Viper can do. I don't care who's faster... I just let them rev their motor and say to...
  24. 9

    DIY Hoist for RT/10 Hard Top

    Anybody have pics of their setup? And even better, a write up on how? I swear that my girlfriend acts like she is going to DIE everytime I ask her to help me take it on and off. I've tried to take it on and off by myself but the top is just too big and bulky for me to handle safely. I garage...
  25. 9

    Lock in RT/10 Glove Box

    One of those JL Audio 6W0 subs. Doesn't sound as good as I expected. I believe that I will have to somehow make the area a "real" box using fiberglass or something to make the sub sound better. It seems like I just installed a better speaker just to make that area shake and rattle harder...

Latest posts

Members online

Total: 901 (members: 43, guests: 858)

Forum statistics

Threads
153,843
Posts
1,686,701
Members
18,455
Latest member
Mando9595

Share this page

Top