Search results

  1. pokeyl

    Doug Shelby Engineering - Battery Cover

    TX30L
  2. pokeyl

    Doug Shelby Engineering - Battery Cover

    Dzus 1/4 turn fasteners. Money saved bought a Li-Ion Amazon, works perfect. I have a battery cut-off switch and a charger cable to cover long term storage.
  3. pokeyl

    stand alone ecu

    What about Haltech? https://www.haltech.com/product/ht-195000-nexus-r5-vcu/ https://www.boomslang.com/haltech-nexus.php#!/
  4. pokeyl

    What did you do to your viper today?

    Got Food
  5. pokeyl

    *Update* Gauge Swing / Run start issue (see video)

    Wake up control from BCM pin 5, to instrument cluster pin 11. I cant tell if its a ground or voltage. If you can put a meter on it and see 4 spikes? It's a start.
  6. pokeyl

    1999 ACR

    Cross posted https://www.facebook.com/marketplace/item/1815003525812341/?mibextid=dXMIcH
  7. pokeyl

    Front Fender Vents

    Went for a drive in the rain today. Only way to test without a wind tunnel. Works like it should. Zero spray from front wheel well, all out the top of the fender and the side vents. Total mess on the sides of the car. Poor mans CFD!
  8. pokeyl

    Front Fender Vents

    Finished
  9. pokeyl

    Front Fender Vents

    https://racelouvers.com/curved-fender-louver-pair-6x16-rsf-fender-trim/
  10. pokeyl

    Front Fender Vents

    Yes
  11. pokeyl

    Front Fender Vents

    I'll get them on next week.
  12. pokeyl

    3.55 gears in a gen 3

    I did 3.73 4 years ago and wavetrac. Zero problems, and I the car hard!!!
  13. pokeyl

    EBC SR21 Pads

    Just Installed and "WOW" is the only word!!! Installed per directions, works from dead cold to as hot as i can get them on the street, Autocross next month. Some noise, but not bad, same as some of the carbotech pads I have used in the past. (XP-8 10 12 and 20) Dust is high... That's...
  14. pokeyl

    Mild overheating problem Please Help

    Cool, Thanks for the help.
  15. pokeyl

    Mild overheating problem Please Help

    Mine Started yesterday, and has the code. I'm going to try to rebuilding the unit. Nothing to loose. I have and open coil on the solenoid, so ne leaks at the valve. Try to use one of these. https://www.mcmaster.com/products/solenoid-valves/solenoid-coils-2~/ After some more test it is the...
  16. pokeyl

    No signal lights 2003

    Do the windows work correctly. That is the only BCM reset I know of.
  17. pokeyl

    No signal lights 2003

    Hazard lights are powered at all times. Turn is only when the ignition is on. Looks like that power comes from the BCM.
  18. pokeyl

    Corner Balance

    As for driving it, next autocross is Oct. Can't do to much on the street.
  19. pokeyl

    Gen 5 ACR wheel vents on Gen 3-4???

    If you have a source for $90 i will do that.
  20. pokeyl

    Gen 5 ACR wheel vents on Gen 3-4???

    Can anyone with an Gen 5 ACR measure your fender vent, or post a pic with a tape measure on the vent? I need some data to build mine. Thanks 3D scan is perfect I have a 3D printer. Thanks
  21. pokeyl

    Gen 5 ACR wheel vents on Gen 3-4???

    Can anyone with an Gen 5 ACR measure your fender vent, or post a pic with a tape measure on the vent? I need some data to build mine. Thanks
  22. pokeyl

    Corner Balance

    More corner stuff new shocks and springs. The thing i see now is the passenger side is 1/2 inch higher than the driver side. I placed 200 lbs in the driver seat for all measurements.
  23. pokeyl

    Gen 5 ACR wheel vents on Gen 3-4???

    I'm looking at 3D print some vents and mount in the same location as the e Gen 5 ACR, after some aero testing. I have a spare set of fenders to work with, all the factory items will be stored. Anyone worked anything like this before?
  24. pokeyl

    Amplifier wiring harness

    Passenger side door speaker wire???
  25. pokeyl

    Amplifier wiring harness

    How did you do the passenger side? Driver is easy, I can't even see the pass-through on the other side. Gen 3

Latest posts

Members online

Total: 1,216 (members: 15, guests: 1,201)

Forum statistics

Threads
154,443
Posts
1,691,058
Members
19,184
Latest member
MakinWaves

Share this page

Top