Hi!,
Looking for a set of RT/10 Gen 1 dash billet polished gauge bezel trim rings. Does anyone one know if something like these are available from anywhere?
http://tinyurl.com/a5cyjaz
http://tinyurl.com/a8cvnnw
Cheers,
Greg
Hello,
Any one know of a supplier that provides services or a DIY kit to cover a Viper dash and center console bezel with vinyl or ??? I'm not looking for carbon, simulated wood or anything super bling, but rather just a simple gray (or black) vinyl glued (?) on covering? I have three OEM...
Just curious where San Francisco Bay Area owners are getting their snakes serviced? Regular maintenance and small repairs specifically? Not many dealers around these parts these days. I'm looking at a 30K maintenance stop. Dealer in Richmond CA is saying to expect $800 to $1200! Yikes...
Hello,
What would a untitled 94 RT/10 with 900 miles be worth? NOS at dealership. I assume since it’s untitled it comes with a full warranty?
Thanks in advance.
Hello,
The paint at the corner point where the A-pillar and the top of the windshield meets has worn through to the primer (white?) on my RT/10 as a result of the using a hard top over the years. The defect is a little smaller than a quarter on each side (drivers and passenger sides), but...
When my Gen 1 tank is full (and only when completely full) and parked at a slight side-to-side angle, like on a public street with a normal street curve for rain run off, fuel will puddle just behind the right rear wheel. I suspect that this has to do with the filler neck. (?) Anyone had this...
My 95 RT/10 needs a new fuel pump. Cranks at startup and getting worse. Dealer confirms and says its $1050 parts and labor. Anyone know what the actual parts go for and how much of this is labor as I suspect that my dealer is not offering any parts discounts?
Anyone have the Sneaky Pete and/or Viper logo in Illustrator format that they would be willing share? My daughter has a summer camp project she would like to use the logo for. Art will NOT be used for profit. Personal use only.
Thanks for you're considerations!
The headlight switch on my Gen 1 became inoperable last weekend. After removing the lower dash cover to gain access, I was surprised with a nice little burn as the switch itself was EXTREMELY hot! So, I waited for the switch to cool and then proceeded to remove it in anticipation of...
Dave asked me to post this post from the Corvette forum in hopes that some of us Viper folks will make a showing... Should be a good time! Let's get a bunch of Vipers on the road and join the fun!
NOR-CAL COASTAL CRUISE – Saturday, August 6th – Ready for another cruise? We’ll meet up early...
Is it possible to replace a Gen I hood with a Gen II hood and if so, is the hood all that is required or would other parts be needed? Hardware? Intake?
The carpet on my driver’s side door has started to peel away from the top just underneath the door handle and I’m wondering is there am any magic to repairing this situation? I assume it’s just glued or is it just tucked up under the door panel? If so, is there anything special I should know...
I took my snake into the local DC dealer (I know!) last Friday as it had developed a small oil leak - which I could not troubleshoot.
I got a call later that day saying that the leak was coming from the oil dipstick tube as a result of an aftermarket stick. A while ago I had indeed installed a...
I haven’t driven my snake for a few weeks due to rain and such so I took it out today for about a 20-mile run. While out on my run the temp gauge never showed any signs of high temps.
Everything performed as expected, but upon my return I noticed that a LOT of anti-freeze (?) was spilling out...
I just heard a story from a friend about a local guy who recently bought a ‘95 RT/10 Emerald Green snake just like mine only with less than 4ooo miles in factory condition.
Four weeks in the new owner’s possession - after 10 years of being taken care of - and it’s now gone. This weekend this...
I saw a red RT/10 sporting a soft top rolling down Bryant Street in San Francisco yesterday about 6:30AM. Just curious if it was someone who frequents this board? :headbang: :headbang: :headbang:
Boy, what a difference! I was driving on my Pilot’s for about 4 months now without complaints. I took my snake in to remove a nail from one of the rear tires. The mechanic asked me if I was interested in a performance match balance? After he explained what this was, I took the bait. 3 1/2...
The ashtray on my Gen I keeps popping out. It appears that the clip holding the tray in has broken. I found the broken clip yesterday and it appears to have been plastic welded originally. I have never had to take the center bezel apart. Does anyone have any tips on how to do this as well...
CALLING THE VIPER NATION: Let\'s thank the boyz and girlz fighting in Iraq!
In the winter 04 VIPER magazine there was an article featuring Darin Jackson who is currently serving over in Iraq. After reading his story, I took a few moments of my time to personally thank him - and all service...
I have an ad running in the VCA classifieds looking for an OEM Emerald Green hardtop for my ‘95 snake. A few days ago I get an email from some guy saying that he has exactly what I’m looking for in perfect condition with bag AND stand. He says he’s going through a divorce and just needs to...
I’m wondering what the occurrence of paint cracks and/or bubbles on Gen I painted body parts is – hoods in particular? My snake has a small number small half moon shaped cracks mostly on the passenger’s side of the hood toward the firewall. Looks like finger nail clippings.
These cracks are...
I’m wondering if these work as well as the K&N FIPK2 unit? It seems to me there’s very high chance that the Belangers would be sucking a fair amount of engine compartment air??? The Belanger’s have a bit more bling and are about 100 bucks cheaper… any thoughts???
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.