Boost guage vacuum soure

viper04

Enthusiast
Joined
Apr 17, 2007
Posts
379
Reaction score
0
I was wondering where you guys and gals that are running a boost guage (Paxton-Turbo cars) are getting your vacuum soure from? I know manifold vacuum, brake booster and Idle air bypass can be used, if I'm not mistaken. Let me know what vacuum soure you guys are useing, if you have any picture please post it. Thanks in advance.
 

VIPER R

Enthusiast
Joined
Mar 26, 2006
Posts
297
Reaction score
0
I put a tee fitting into the brake line, 7 years and no problems.
 

Nixon's SRT

Enthusiast
Joined
Mar 17, 2009
Posts
348
Reaction score
0
If you are running the split second box it should be under your dash. I would T off that
 
OP
OP
V

viper04

Enthusiast
Joined
Apr 17, 2007
Posts
379
Reaction score
0
Nixon
Thanks for the reply, not going to run the split second box. Where are you running your?
 

Nixon's SRT

Enthusiast
Joined
Mar 17, 2009
Posts
348
Reaction score
0
Mine goes through to the engine bay and T'd into to a line from my boost controller

From my paxton car,
Look at the positive battery post on the fuse box and about 4 inches up at the 10 o'clock position, thats the T that was inserted to the line going from the intake manifold to the brake booster. My gauge, FMU, blowoff, and split second all started from that location

You must be registered for see images attach
 
OP
OP
V

viper04

Enthusiast
Joined
Apr 17, 2007
Posts
379
Reaction score
0
Nixon's
Thanks for the picture, looks better that I was thinking.
 
Top