Changing Fog Lamp Bulb on 1994 RT/10

[Scorch]

The Service Manual says to "Remove front fascia as necessary to gain access to fog lamp assembly." You've got to be kidding me!!!

Now, can someone please tell me how to change a burned out fog lamp bulb without diassembling the front end of my car?

Thanks as ususal.

 

[Ulysses]

remove tire or just turn tire to side depending on how big you are. Remove access plug in wheel well, reach in and remove.

 

[Scorch]

Thanks Ulysses. I'll give it a go. Car is currently on jack stands (new tires, brakes, and a lot of cleaning).

 

[CitySnake]

Wear thin gloves (or you'll scrape the heck out of your knuckles)!

 

[Scorch]

Sorry Gent's, can't be done. GEN I and GEN II fog lamps must be different. My fog lamp must be removed from the fascia and disassembled to replace the bulb. It's a european design manufactured by Bosch. The bulb is an "H3".

Any additional advise?

 

[carguy07]

Maybe this helps. I'm sure Chuck could walk you through it.

http://vca2.viperclub.org/forums/showflat.php?Cat=&Board=UBB14&Number=247740&Forum=UBB14&Words=fog%20light%20&Match=Entire%20Phrase&Searchpage=10&Limit=25&Old=allposts&Main=247734&Search=true#Post247740

 

[Scorch]

Thanks for the link carguy07. Changed both bulbs today. The person who wrote the Service Manual procedure should be flogged. "Remove the fascia". That's just dumb!