Clutch FW compatibility

[V10 MOJO]

this year I have been sticing with stock/stock setup. considering trying some aftermarket combos again though.

I have a RPS alum four puck FW; Im considering a spec2 clutch? any input

 

[99 R/T 10]

Won't help you any in either case, you're in for an A$$ whooping, and answer your phone!

 

[V10 MOJO]

you have never beat me and you will never beat me so just get back into the helicopter and put on your mirrored sunglasses (the ones with the mirrors on the insides as well, LOL) and wish, hope and pray for the day you can truly say you beat me in the 1320, cause til then....I OWN YOUR ASSS!!!!

 

[PBJ]

Rich,
You will need at least a 3 or a 3i to take your combo...it may need a 5 on the spray. I sell stage 2 clutches for a lightly modded mustangs. I have had Camaro guys take out stage 3 clutches on the bottle. You would be wasting your time on a stage 2. Call me if you want one, I will give it to you at my cost.
Later,
Joe

 

[Jack B]

Rich:

PBJ has good input - the 3i is the minimum you can use. Also remember, it has to be broken in (500 miles) and you cannot put it on a FW with any irregularities. If you don't break it in slowly you will break it, period.