Need pictures of Line Lock installation on GEN3

[Schulmann]

I want to install a Line Lock on my 06 Coupe.
The space is very tight aroung the brake master cylinder.

I need a couple of pictures of your installation.

 

[Schulmann]

Hey guys, don't forget to post some pictures for me ...

 

[FATHERFORD]

Wouldn't mind seeing pictures for ideas myself.

 

[Kevan]

This is MY DIY article for the SRT-10 trucks, complete with dozens of pics and a wiring diagram.
Most of it should transfer over to the cars.

PART 1:
DIY: Line Lock Installation (PART 1 of 3) - .:SRTConnection:.

PART 2:
DIY: Line Lock Installation (PART 2 of 3) - .:SRTConnection:.

PART 3:
DIY: Line Lock Installation (PART 3 of 3) - .:SRTConnection:.

 

[Camfab]

This is MY DIY article for the SRT-10 trucks, complete with dozens of pics and a wiring diagram.
Most of it should transfer over to the cars.

PART 1:
DIY: Line Lock Installation (PART 1 of 3) - .:SRTConnection:.

PART 2:
DIY: Line Lock Installation (PART 2 of 3) - .:SRTConnection:.

PART 3:
DIY: Line Lock Installation (PART 3 of 3) - .:SRTConnection:.

That's a very well thought out and clean installation job, very nice.

 

[Kevan]

Thanks!
Most of the SRT-10 trucks with line locks use my bracket design.
(and switch placement, and brake light diode, and....LOL)

 

[Schulmann]

Kevan, it is very nice DIY write up.
However in the Viper the space available is very very tight.

I am looking for a similar write up for the Viper.
A couple of pictures about the stelenoid location and the line routing would be enough for me.

 

[Sellshomesdrivesviper]

Kevan -nice write up and photos, thanks for taking the time to share.

 

[Kevan]

Thanks everyone!
I'm glad you like it.

Schulmann- I understand about the limited space thing. Sorry I can't help with that.
Hopefully the basic line routing and wiring diagram from my article come in handy.