Thanks Slaughterj for clear corner light instructions!

[2001 Sapphire Blue]

Slaughterj, Just wanted to thank you again for the instructions on installing clear corner lights. It only took about 20 minutes. The key is to have a small 10mm wrench like you said. I had to go buy one cause mine was too long. Muchos Gracias! They look awesome.

 

[DodgeViper01]

Sounds great. Do you think that you can take a few pictures and post them on the site. I have the same exact car as you and just wanted to see what the lights would look like before I had them installed. Your help would be greatly appricated.

Thanks very much in advance

Keith

 

[2001 Sapphire Blue]

I'll have to round up a digital camera, but they are definately worth the $50.

 

[DodgeViper01]

If you can that would be great. I would really appricate it. If you want you can either post them or e mail them to me if it is easier for you.

Thanks again!!

 

[emo]

I also used Slaughterj's instructions while I changed my brake pads.Very helpful and easy because the wheels were off the car.It took about 5 minutes per side.
Thanks again Slaughterj.

 

[2001 Sapphire Blue]

I'll have the wife bring her digital camera home tonight and she can send e-mail them to you. I'm a little too computer challenged to do it myself.

 

[slaughterj]

You're welcome to both of you!

The key is to have a small 10mm wrench like you said. I had to go buy one cause mine was too long.

That's a terrible problem, but I'm sure your wife doesn't mind

 

[NCVCA]

I used slaughterj's instructions for getting a date.

oh. uh. whatever. maybe the car stuff he's better at!!

HAHHAAA!!!

John I just had to bust on ya...

I'm sure your a pro with the small wrenches.

=-)

 

[slaughterj]

I used slaughterj's instructions for getting a date.

oh. uh. whatever. maybe the car stuff he's better at!!

HAHHAAA!!!

John I just had to bust on ya...

I'm sure your a pro with the small wrenches.

=-)

Getting a date? Now what's your wife going to think of that?

As for wrenches, I had to go to the toolbox to get a small one