What do your wipers do?????

[bmw2nv2000]

OK I got caught in a small shower the other day and could not help but notice my wipers only have low and high but the lever says down is single swipe and up one notch is delay, up two notches is low, and up three notches is high. And I even have a delay adjuster on the stalk but yet when i move it up one notch the wipers are on low and the next up notch puts them on high. And the down push on it does not do a single swipe. The washer action works too. Any one got any ideas?

 

[Darbgnik]

I've never driven mine in the rain, but my guess is at the low speed notch you turn the end of the stalk to modulate the speed. If thats what you were asking?

 

[bmw2nv2000]

Well on the low speed I turned the delay adjustment and it did not change the speed of the wipers. Will someone please check there srt10 and let me know how all there wiper function operate in each position. And if mine are not operating correctly does anyone have a clue what needs to be replaced. I don't think it would be the multi-function switch because headlights and blinkers have worked flawlessly. Thanks guys for any help you can give.

 

[bmw2nv2000]

Come on guys 55 views and nobody can tell me what there wiper functions are? Someone please step up this is buggin the crap outta me.

 

[Darbgnik]

Betcha most people on here don't know!

 

[Darbgnik]

OK, so I just went out to the garage to try it, as I'm curious, and its -30 degrees here anyways so its the only excuse I've got to play with it for another 3 months.
As far as I can tell mines the same as yours.
Push down: one swipe
Push up one: low speed
Push up two: medium
Push up three(top): high
In any of these positions the twist of the end does nothing
If I were to guess its a parts bin thing, that does nothing.

 

[bmw2nv2000]

Thanks, Now I know for sure mine only has the medium speed and a high speed so my swirch must be broken and pushing down on mine does not swipe like yours so I need to figure out my problem. Anyone have any ideas. Calling all Viper techs, Neeeed help here.

OK, so I just went out to the garage to try it, as I'm curious, and its -30 degrees here anyways so its the only excuse I've got to play with it for another 3 months.
As far as I can tell mines the same as yours.
Push down: one swipe
Push up one: low speed
Push up two: medium
Push up three(top): high
In any of these positions the twist of the end does nothing
If I were to guess its a parts bin thing, that does nothing.

 

[Newport Viper]

I've never driven mine in the rain, ......

Me neither!







Nor has it seen snow LOL!

 

[Venomiss]

Thanks, Now I know for sure mine only has the medium speed and a high speed so my swirch must be broken and pushing down on mine does not swipe like yours so I need to figure out my problem. Anyone have any ideas. Calling all Viper techs, Neeeed help here.

Viper Techs.
First you can call either Mark Jorgensen.
Woodhouse Viper Service Mgr.
800-889-1893 work
402-677-2935 cell

or you can call Chuck Tator.
Phone 914-763-3136


Fax 914-763-9507

 

[bmw2nv2000]

Thanks Venomiss

Viper Techs.
First you can call either Mark Jorgensen.
Woodhouse Viper Service Mgr.
800-889-1893 work
402-677-2935 cell

or you can call Chuck Tator.
Phone 914-763-3136


Fax 914-763-9507