Search results

  1. J

    Highpower Nitrous Track results!

    I think the Maximiser is cool. Scotty (TOOFST) LOVES it! He is able to run Nitrous on Street Tires at the track thanks to it. I currently am not running it. Thanks, Jason
  2. J

    Highpower Nitrous Track results!

    I installed a Highpower Nitrous system. I bought the kit from Denny at www.racetested.com I then took the car to Macedo Motorsports for my Heavy Duty half shafts, and Headers/Exhaust (they did a killer job), along with some time on the Dyno where we tuned the N20 a little. Thanks, Jason
  3. J

    My Nitrous results & Thank you to Larry Macedo

    Re: My Nitrous results & Thank you to Larry Macedo Jack, You were asking about the sprayers. Each sprayer is supposed to support up to 170hp. I will try larger jets after I get a clean pass on the ones I have. The car went 10.65@132 with a really bad bog, and no purge. 1.69 60' . When it...
  4. J

    Highpower Nitrous Track results!

    The weather was awesome! The track was prepped! Too good... I drove 1.5 hours there and went straight to the line and ran a Motor Only pass. The car now has tubes/filters & headers/exhaust, thats it. I launched at 4500 and the car dead hooked, bogged really bad. Crappy 60', but the car...
  5. J

    My Nitrous results & Thank you to Larry Macedo

    Denny at racetested.com furnished the bottles and 90% of the N20 components. Denny was very helpful, as was Jack B., Toofst, Macedo Motorsports. I put the kit in myself. Thanks, Jason
  6. J

    My Nitrous results & Thank you to Larry Macedo

    Macedo Motorsports hooked me up with half shafts & Headers/exhaust yesterday. They were AWESOME! Great work habits, professional, kind. Did not give me any grief about going my own route with the Nitrous, and went the extra mile on their installation/service down to every last detail. I...
  7. J

    BTR 2003 4x4 Hemi Truck runs 13.90......................................

    That is AWESOME!!! How is the SRT-4 coming along??? Any new #'s track times? Jason
  8. J

    NOS experts, opinions please

    Im not doubting Tony's expertise. I just hate seeing a new product get slammed just because it is different. Id rather see someone slam it after having a problem with it, instead of speculation. Constructive slamming :D Peace... Jason
  9. J

    NOS experts, opinions please

    I just noticed your a NOS dealer. I get it.
  10. J

    NOS experts, opinions please

    The compartment door has nothing to do with Highpower Nitrous (the company that makes these solenoids). Do you think they supply compartment doors with their kits? This particular distributor is just trying to show some of his product out there being used, since it is new to the states.
  11. J

    NOS experts, opinions please

    Im going this route. I should be done by this weekend. I figured I would give it a try. Denny at Racetested has been great to deal with. Jason
  12. J

    V-10 Nationals Florida and 04 season

    So for the classes below, you can run pretty much any tire/mods right? Stock Class 12.00 and up Street Class 11.00 - 11.99 Super Street 10.50 - 10.99 Pro Street 9.90 - 10.49 Unlimited 9.35 - 9.89 unlimited Pro Viper Vin # Required Also, the street tire shootout, you can have any mods, but...
  13. J

    new purners rims?

    The wheels are awesome! Jason Call John at CCW CCW (complete custom wheel) 386-258-0083
  14. J

    roll bar for drag racing. Suggestions ?

    BTR makes what looks to be a real nice bar that is an approved unit, and Tom mentioned that the seat still has full functions. I need to get one also. The only one I have personally seen was one that Larry Macedo put in Fuelmans car. It was real nice, and the seat went back all the way, but...
  15. J

    Any tips on removing GTS aluminum gas cap?

    I just glanced at it, but it looks like after removing the bolts the filler neck might prevent it from just coming out? Any tips??? Thanks, Jason
  16. J

    pictures of NEW 19" CCW wheel.

    Re: pictures of NEW 19 Contact John at CCW (Complete Custom Wheel). 386-258-0083
  17. J

    17" E.T. Streets are now avalible .................

    Re: 17 Please go with a CCW Drag setup! I did the et drags with radials up front on my 670hp Cobra replica and almost killed myself. It was out of control on the top end. Combine that with a 90" wheels base made for some tense running. I raced a few weeks ago with the Viper and the CCW Drag...
  18. J

    Installing Belanger headers at home???? Difficult?

    Im considering the Belanger Headers. How hard is this gonna be for a fairly decent wrench in a home garage without lift. Maybe this should be a project to do after the new garage is finished (will have lift) Thanks, Jason
  19. J

    Macedo tuned stock 99 GTS runs 11.2

    Yes, what did all the Vipers run????? Wish I made it out, but have been working too much. Jason
  20. J

    pictures of NEW 19" CCW wheel.

    Re: pictures of NEW 19\" CCW wheel.
  21. J

    Does anyone have a Gen II air box they want to part with???

    I was messing around under the hood and broke a chunk off the front of my air box :( If anyone has upgraded and does not need their stock one, I would love to take it off your hands. Thanks, Jason [email protected]
  22. J

    How does this time rate for the mods I have?

    I ran a string of 11.5 runs at the dragstrip the other day. The temp was about 85 degrees with 70% humidity. 1997 GTS Mods are: No resonators (stock headers/exhaust) Tubes/filters Vipair CCW Drag Wheels/ET-Streets I am thinking I got everything out of the car that I could given the weather...
  23. J

    Stock half-shaft - should I worry?

    I rented the dragstrip yesterday with some friends. I was hesitant to use the new Drag setup from CCW skinnies/ET-Streets without heavy duty shafts. Well, I used them anyway and ran about 15 runs launching from 4000-5000rpm without ANY problems. I will upgrade my half-shafts, but was pleased the...
  24. J

    VIPAIR™ Dyno Results on 99 RT 16 RWHP!!

    Re: VIPAIR™ Dyno Results on 99 RT 16 RWHP!! Well it was a long day. I rented the track with some other Viper guys and friends. My ONLY mods are smooth tubes/filters/VIPAIR. CCW drag setup. Stock half shafts (I can't believe they held up) Stock catback/stock headers etc... I ran a string of...
  25. J

    Orlando Speedworld Drag results

    I want to thank everyone who came out. We had a blast. Definately could of used some sunscreen :o and bee spray :eek: . I have to give some credit to John of CCW who twisted my arm to get the drag setup instead of just going with drag radials. I launched at 4000-5000rpm and it just goes. My...

Latest posts

Staff online

Members online

Total: 732 (members: 5, guests: 727)

Forum statistics

Threads
153,843
Posts
1,686,699
Members
18,455
Latest member
Mando9595

Share this page

Top