Search results
-
F
Thanks for the record keeper=et's and horsepower etc....but..
Re: Thanks for the record keeper=et\'s and horsepower etc....but.. I'd like to suggest adding the year and model information.- Flyin Phil
- Post #5
- Forum: RT/10 and GTS Discussions
-
F
Need help w/shift light wiring
For my '96 RT/10, using this same light, I tapped into the line connecting to the tach itself. I then had to set the configuration to 5 cylinders and it worked GREAT!- Flyin Phil
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
Drag shocks
I've been contemplating suspension changes aimed at the drag strip. I ran across so-called 'drag shocks', and it looks like they are just for the front of the car. I figure they allow the front end to raise easily under hard acceleration, thereby transferring weight to the rear. Is this...- Flyin Phil
- Thread
- Replies: 1
- Forum: RT/10 and GTS Discussions
-
F
What is the 'heavyweight' engine?
Re: What is the \'heavyweight\' engine? Thanks Chuck. Do you know what accounts for the additional weight?- Flyin Phil
- Post #12
- Forum: RT/10 and GTS Discussions
-
F
VIPER ON EBAY
I sent a very cordial email to the dealer to ask whether the car had been in a collision due to the non-original stripes on the hood. The dealer never replied.- Flyin Phil
- Thread
- Replies: 0
- Forum: RT/10 and GTS Discussions
-
F
Question about required safety equipment
Exactly the info I was looking for. Thanks, Tom!- Flyin Phil
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
Question about required safety equipment
Can anyone list (or provide a pointer to a list of) the required safety equipment for the different drag race ET time ranges? I understand that safety equipment requirements change once you go quicker than 14 seconds, 13 seconds, 12 seconds, etc. I also understand that they differ somewhat...- Flyin Phil
- Thread
- Replies: 2
- Forum: RT/10 and GTS Discussions
-
F
What is the 'heavyweight' engine?
Re: What is the \'heavyweight\' engine? I inquired directly to T&D and was confirmed by their tech that these roller rockers will indeed work for my '96 RT/10. I got these off of Ebay for $730 plus shipping (Another identical set went for $810 last night). They are new and arrived in an...- Flyin Phil
- Post #8
- Forum: RT/10 and GTS Discussions
-
F
What is the 'heavyweight' engine?
Re: What is the \'heavyweight\' engine? The thread you refer to is the one I linked above.- Flyin Phil
- Post #5
- Forum: RT/10 and GTS Discussions
-
F
What is the 'heavyweight' engine?
Re: What is the \'heavyweight\' engine? Thanks for the link. I ran across that data prior to my purchase and asked about it on this board. These should work for my car based upon info from Doug Levin in the following thread: Link to 1.7 Roller Rockers Thread According to the T&D website...- Flyin Phil
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
What is the 'heavyweight' engine?
What is the \'heavyweight\' engine? I received my Mopar Performance Race Rocker Arm Assembly P/N P5007049 today and verified that they really are from T&D Machine Products in Carson City, Nevada. The Mopar installation instructions state the following: "This kit will not fit 1996 and earlier...- Flyin Phil
- Thread
- Replies: 14
- Forum: RT/10 and GTS Discussions
-
F
Anyone use the SMT5 or SMT6?
I downloaded the software and it looks like this controller will allow loads to be modified based upon 500 RPM ranges. Basically allows programming to +/- fuel and/or advance over user specified RPM ranges. It's a piggyback system, so you program it from your PC but the settings are saved...- Flyin Phil
- Thread
- Replies: 5
- Forum: Performance Modifications
-
F
Need 1.7 Roller Rockers info for Gen I
Doug, thanks for clearing this up for me. The Mopar web site specifically excluded pre-97 RT/10s, so I thought there was some reason for the exclusion. If you're certain then I'll go ahead and get these. Thanks.- Flyin Phil
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
Need 1.7 Roller Rockers info for Gen I
I just found someone looking to part with some roller rockers for the Viper, mopar P/N P5007049. Unfortunately, it looks like these roller rockers WILL NOT fit my '96 RT/10! Can anyone describe the difference in the heads between the '96 RT/10 and the later RT/10s, as well as the '96+ GTS...- Flyin Phil
- Thread
- Replies: 3
- Forum: RT/10 and GTS Discussions
-
F
New England Dragway Vipers vs. Vettes tomorrow (10/27)
According to the New England Dragway website , the Vettes vs. Vipers event which was rained out two weeks ago (10/13) will be held tomorrow (10/27). I doubt many people are aware of this. It's also just about the last opportunity this year to race at that track.- Flyin Phil
- Thread
- Replies: 0
- Forum: VCA Viper Events and Gatherings
-
F
New England Dragway Vipers vs. Vettes tomorrow (10/27)
According to the New England Dragway website , the Vettes vs. Vipers event which was rained out two weeks ago (10/13) will be held tomorrow (10/27). I doubt many people are aware of this. It's also just about the last opportunity this year to race at that track.- Flyin Phil
- Thread
- Replies: 12
- Forum: Viper Racing/Dyno Results/Time Slips
-
F
nitrous colder plugs-
I recently looked into getting colder plugs for nitrous also. I found that most of the manufacturers decrease their heat range number as the plug gets colder. However, NGK was the only manufacturer I found that REVERSED this and raised their number as the plug got colder. FR6-1 would be 1...- Flyin Phil
- Post #2
- Forum: RT/10 and GTS Discussions
-
F
shiftlight for Vipers
If you've got an older Viper (mine is a '96), the shift light electronics needs to support a 5-cylinder configuration. Since there are two coil packs in my car, the tach sees a pulse for every 5 RPMS (I think) instead of the expected 10 for a V10. I tapped into the cable that plugs into the...- Flyin Phil
- Post #2
- Forum: RT/10 and GTS Discussions
-
F
What gears do I have?
Thanks, gents. I was thinking about counting revolutions of the engine, but you've pointed out that I need to count revolutions of the driveshaft only. That's easy to do.- Flyin Phil
- Post #9
- Forum: RT/10 and GTS Discussions
-
F
Day 2 heats things up! (lotsa pics)
Chris, thanks for taking the time out of your personal fun to post all these pics and write up all of this narrative. You allow everyone else to share in the adventure and I expect that many, many more online folks appreciate your efforts. If ever we meet, I owe you one!- Flyin Phil
- Post #8
- Forum: VCA Viper Events and Gatherings
-
F
What gears do I have?
phiebert, thanks very much for the chart. I will use it to see what I've got. I'll also validate by tire diameter. onerareviper, thank you, I agree that the most accurate method would be to count revolutions, though I didin't do this as I thought it'd be alot of work getting the car off the...- Flyin Phil
- Post #4
- Forum: RT/10 and GTS Discussions
-
F
What gears do I have?
I am not the original owner of my car and am not sure what gear ratio is installed. Does anyone have speed comparison info available? For instance, 60MPH should be ??? RPMs with 3.07 gears, ??? RPMs with 3.55 gears, ??? RPM with 4.01 gears. I have 17 inch tires. Thanks in advance.- Flyin Phil
- Thread
- Replies: 9
- Forum: RT/10 and GTS Discussions
-
F
Window Decal
When I had a decal on my Trans Am, it went on the inside of the windshield, so no concern about the elements.- Flyin Phil
- Post #2
- Forum: RT/10 and GTS Discussions
-
F
Intake Gaskets??
BTW, the manual for my '96 states that the torque spec for the Intake Manifold Bolts is 23N-m, which translates into 16.96 ft-lbs.- Flyin Phil
- Post #6
- Forum: RT/10 and GTS Discussions
-
F
Half Shaft Safety Loops
Deleted. <FONT COLOR="#ff0000" SIZE="1" FACE="Verdana, Arial">This message has been edited by Flyin Phil on 09-10-2002 at 09:01 PM</font>- Flyin Phil
- Thread
- Replies: 0
- Forum: RT/10 and GTS Discussions
Latest posts
-
-
-
-
Wheel speed signal failure that changes locations check engine on- Latest: Viper Specialty
-
-
-
