Search results

  1. N

    advice please on purchase of gen v launch edition

    hI, please can anyone here tell me what to look out for ( recalls etc ) on a gen v launch edition , it has approx. 9,000 miles, thanks.
  2. N

    acrx headers what size is best ?

    i want to fit a new set headers on my 97 gts . i have a 3" corsa cat back. k and n and smooth tubes. can anyone tell me if the 1 3/4" acrx headers will be suitable or are the 1 5/8" a better bet ? i am thinking of fitting the larger diameter in case i want to tune the car more in the...
  3. N

    what rockers, headers 97 gts plus power gain

    i have a 97 gts 9,000 miles hi flow cats 3" corsa catback k and n panel filter smooth tubes. any ideas what are the best headers to go for, i had bellanger on my last 99 gts but there might be better ones out there ? also roller rockers . i need to know what are the best ones out...
  4. N

    willwood prop valve setting ???

    i am fitting daves big brake kit ( srt calipers front and rear ) i have srt rotors on front, gen2 front rotors on rear. please can anyone give me an approx setting for the adjustment knob on the willwood prop valve before i test the car? thanks!
  5. N

    brake line fitting size HELP required please

    i am fitting a Wilwood prop valve to my 97 gts and need to connect it to the lower brake line ,the largest one closest to the windscreen that comes up from the chassis from the rear of the car. please can anyone confirm the exact size of the fitting at the end of this pipe that screws into...
  6. N

    daves big brake torque settings ?

    please can anyone give me the torque settings for daves big brake kit, i need to know what torque for each bolt and is loctite required on any of them ?? thanks
  7. N

    best place to get quality gen 2 clear markers ??

    please can anyone point me in the right direction to get good quality clear markers for a gen 2 ? thanks.
  8. N

    what size ccw 600 wheels to suit 97 gts ????

    i am about to buy new wheels to suit a blue/white 97 gts . please can anyone tell me the best combination from the following , a srt big brake kit or similar will also be installed at the same time. ccw 600 19" front 19" rears ccw 600 19" front 20" rears ccw 600...
  9. N

    best lolking wheels for blue/white 1997 ? help needed

    i have just bought a blue/white 97 gts . please can anyone guide me in the right direction for the best looking and size wheels ? thanks.
  10. N

    ACR ground clearance

    hi, i am considering an ACR but live on a farm with a gravel track leading to it . we are not allowed to re surface the track,only to fill the pot holes as we do not own it . my gts only just clears the lane surface , i am wondering how the acr compares in height? can anyone give me the...
  11. N

    COIL PACK TEST

    i had a pair of gts coils tested and were told they are ok. is it possible for them to have an intermittent fault under 3000 revs and different driving conditions?
  12. N

    coil pack question. help needed.

    i have just been offered 2 coil packs to fit a gts which have the same part number as stock other than the embossed numbers are in different locations to the original dodge coils. i have been told they are for a v4 and v6 voyager. any idea if these can be used on a gts and if so how what is the...
  13. N

    1999 viper gts coil connection to loom

    99 viper gts. please can anyone tell me if the connector on the loom that attaches to the 4 post coilpack has round or flat terminals ? thanks.
  14. N

    1999 gts PCM WANTED

    i am not 100% sure yet but i think my pcm is on the way out. has anyone here got a perfect one for sale to suit a 99 gts ? i don't know if this makes a difference -the car has only the following mods , belanger headers ( no pickles) ,random cats , 3" corsa catback , k and n filters and a vec...
  15. N

    MSD injector connector clips WANTED

    has anyone got any unused msd injector connectors for sale ( like the ones sean roe supplies with his supercharger) if so please let me know details and cost. thanks.
  16. N

    vec 2 firmware update urgent help needed

    BC24001 - BC24024 BC30001 - BC30085 BC30148 - BC30196 BC30201 - BC30291 BC30308 - BC30386 BC30400 - BC30499 BC30500 - BC30599 BC30600 - BC30682 please can anyone help, i am uploading my vec 2 firmware and i have 2 bc numbers and am unsure which one of the above HEC zip files are...
  17. N

    innovate LC1 fitting advice

    i need to remove the insulation material ( comprising of outer rubber / string /foil and a single non insulated strand of wire ) from my lc1 to enable me to fit it correctly in the desired position. can anyone tell me if it is OK to remove about a foot or longer of this outer insulation. also...
  18. N

    o2 sensor wires ???

    i need to extend the length of the o2 wires,can anyone tell me the correct gauge of wire to use for this job, thanks.
  19. N

    NTK oxygen sensor ???

    my 99 gts is fitted with NTK japan 56041212ae oxygen sensors at the headers. please can anyone tell me if these are the correct ones? also were NTK japan sensors fitted to the 99 cars from new? thanks.
  20. N

    new location of o2 sensors with roe blower????

    has any one here got a photo showing the best location for the o2 sensors when fitted to belanger headers on a roe supercharged car? thanks.
  21. N

    BILLET POWER STEERING PULLEY WANTED

    HAS ANYONE GOT A MARCH OR SIMILAR POWER STEERING PULLEY FOR SALE , SOMETHING SUITABLE TO USE WITH A SUPERCHARGER? MUST BE IN VERY GOOD CONDITION . THANKS.
  22. N

    SUPERCHARGER PULLY SWAP

    I WILL SHORTLY HAVE A 12 PULLEY SURPLUS TO MY REQUIREMENTS TO SUIT A ROE SUPERCHARGER ( approx 100 MILES USE ONLY). ANYONE POSSIBLY INTERESTED IN A STRAIGHT SWAP FOR A 8 PULLEY????? ( MUST BE IN PERFECT CONDITION ) thanks.
  23. N

    VEC 1 INSTRUCTIONS

    PLEASE CAN ANYBODY HELP? I HAVE JUST PURCHASED A VEC 1 AND DISPLAY UNIT WHICH HAS NO FITTING OR ADJUSTMENT INSTRUCTIONS INCLUDED , THANKS.
  24. N

    belanger header fitting problem

    can anyone give me advice on the following. ----- I fitted a set of belanger headers and the driver side outlet pipe is resting on the frame where it bends to connect to the cat. the passenger side is central to the cut out of the frame.I tried to jack up the drivers side mount with no success...
  25. N

    Door problem

    can anyone identify the following problem. my 99 gts passenger door started to pop open by itself only when unlocked/ parked or when driven up to the speed where the car locks itself. this problem changed within a week and now the car can not be opened at all from the outside switch but still...

Latest posts

Members online

Total: 969 (members: 9, guests: 960)

Forum statistics

Threads
153,218
Posts
1,682,058
Members
17,713
Latest member
webironmongery

Share this page

Top