Emblem help...

[HHI VIPER]

Did a search and cannot find any placement measurements for side embelems on fenders. Would somebody be so kind as to throw a tape on their side emblem of a 2001 or Gen2 and give me the top or bottom measurement and distance from wheel well back or door foreward towards emblem so I can install badges for a car show on Saturday. Had the car painted and that is the only one I do not have and I do not have a service manual to reference. Also rear badge on trunk lid possibly just to check the info I did get for that one. Help a brother out!!!

 

[LiquoRT/10]

On my 2000 I have aprox. 6" up and 4" over. That brings you to the bottom of the V in Viper. It measures the same on both sides. The rear badge is 1" up from the edge.

 

[HHI VIPER]

On my 2000 I have aprox. 6" up and 4" over. That brings you to the bottom of the V in Viper. It measures the same on both sides. The rear badge is 1" up from the edge.

Thanks a bunch!!!! I searched for over an hour for some info so maybe this will help others as well!!! Cheers!

 

[RoadiJeff]

Here's what they say straight from the manual, for future reference if anyone does a search for this.

You must be registered for see images attach

 

[HHI VIPER]

Here's what they say straight from the manual, for future reference if anyone does a search for this.

You must be registered for see images attach

Can't get any better than that! Thanks to both responses!!!