Gen II Hood part

[01sapphirebob]

Hello. I'm just looking to see how much this particular part would cost. I'm not exactly sure what it's called but it's the roller that helps guide the hood to close up near the rear view mirrors. This particular part had a plastic piece on it and on mine the plastic has chipped away. The piece I need is on the drivers side of the car. Attached is a pic. Thanks

 

[01sapphirebob]

Anybody have an idea on this part. WOuld a different picture help?

 

[99 R/T 10]

I think I have one. Let me look for it. If so, I will send it out to you.

 

[01sapphirebob]

I think I have one. Let me look for it. If so, I will send it out to you.

Thanks!!!!

 

[01sapphirebob]

I think I have one. Let me look for it. If so, I will send it out to you.

Any luck on that part yet?

 

[99 R/T 10]

I have one, but I think it is for the passenger side. Not sure if they are universal(fit both sides).

 

[01sapphirebob]

I have one, but I think it is for the passenger side. Not sure if they are universal(fit both sides).

I don't think thy are universal. Thanks for checking for me. The hint continues I guess.

 

[Viper Parts of America]

We believe that Mopar refers to it as the rear hood bracket, of which there is an upper on the hood and a lower on a frame extension - the diagram below is what the parts catalog shows:

There is indeed a left and a right part number (each one is different) with an MSRP of around $80 a pop. Most Mopar parts have a number stamped on them if you care to look closely and confirm. Both parts are available from Mopar dealers.

 

[01sapphirebob]

Tough to tell from that diagram. I have replied to your p.m.