dascorcha21
Viper Owner
- Joined
- May 22, 2010
- Posts
- 47
- Reaction score
- 0
So im at the last part of my electrical install of stuff. im going to run the WOT box and have a few questions..
based on this thread
http://www.viperalley.com/forum/do-yourself-tips-tricks/76682-no-lift-shifting-2-a.html
so in this step your suppose to cut the power feed to the coil packs, but i was wondering if anyone had the pin outs at the PCM so that i could just do some clean connections there instead of behind the engine.
Closer look with the wires cut. The red wire on the WOT Box connects to the right most pair wires (coming from under the intake manifold - power feed). The Red/Black stripe wire from the WOT box connects to the left most pair(from the coils).
based on this thread
http://www.viperalley.com/forum/do-yourself-tips-tricks/76682-no-lift-shifting-2-a.html
so in this step your suppose to cut the power feed to the coil packs, but i was wondering if anyone had the pin outs at the PCM so that i could just do some clean connections there instead of behind the engine.
Closer look with the wires cut. The red wire on the WOT Box connects to the right most pair wires (coming from under the intake manifold - power feed). The Red/Black stripe wire from the WOT box connects to the left most pair(from the coils).
You must be registered for see images attach