HUMM DEVILS DYNO RUN 666

[Mike Adams]

At the Ontario dyno day my car with a Roe blower and 8 psi pulley pulled a 627 rwhp and 666 ft/lbs of torque.

I have lowered my compression (maybe too much) and run a 0 degree card. I had to keep pulling out fuel to lean it out. This leaves alot of room for more boost and more fuel. The graph just kept climbing.

I can run 90 octane fuel without a problem on ping no timing pulled out.HUMMM 11 LBS OF BOOST HERE I COME.


PS Thanks Sean for letting me tune 3 other super charged cars

 

[treynor]

Good stuff!

Interesting too... 8 PSI and 627 RWHP is 27.6 RWHP / PSI. That's essentially the same as what I'm seeing at 19 PSI. There is a very close correspondence so far with boost - HP ratio. I fearlessly predict 710 RWHP on your car if you can run 11 PSI without pulling timing.

Does your car have headers & exhaust, or headwork? You mention lowering the compression... to what, if I may ask?

 

[Torquemonster]

Excellent effort! Keeping the timing up sure helps!

 

[Mike Adams]

I lowered it to about 8.5 to 1 it has head work with bigger valves and porting and polishing. I am sure 11 psi will be no problem

 

[proracer1]

please give me your phone # I need to talk to you send me an e mail [email protected]

 

[BlueGTS]

Can you give a list of all your mods? 1.7's, Headers, etc. Thanks,