MAF sensor connector

vjjack04

Enthusiast
Joined
May 18, 2013
Posts
24
Reaction score
2
Location
Hereford AZ
One of the MAF sensors on the air tube before the throttle body has a broken clip on the connector (on my 2008 coupe). Its still working fine, just a broken clip. Anyone know where I can find one of these specific weather pac connectors? I've searched on line and cannot find ones like are on the Viper. Searches at mopar part sites come up empty too...Any info will be greatly appreciated. Thanks
 

MoparMap

VCA National President
VCA Officer
Joined
Jan 7, 2013
Posts
2,559
Reaction score
329
Location
Kansas
Have a picture by any chance? I got decent at identifying connectors when I had to find all the ones to build the harness for my 5.7 in my 67 Dart. Sometimes they are manufacturer specific, but since this is just going to a sensor I would hope it wouldn't be that oddball.
 
OP
OP
vjjack04

vjjack04

Enthusiast
Joined
May 18, 2013
Posts
24
Reaction score
2
Location
Hereford AZ
MoparMap, I agree it should be a pretty common weatherpack type connector. I will get detailed pictures and post them.
 

NVViperTech

Enthusiast
Joined
Dec 7, 2003
Posts
12
Reaction score
0
Location
Las Vegas,Nevada
This is the MOPAR part number(5013979AC) for the MAF connectors. They are not cheap. But you may be able to find a number on the old connector and search on mouser.com. They may have the connector body and terminals.
 

Attachments

  • maf1.JPG
    maf1.JPG
    23.2 KB · Views: 3
  • maf.JPG
    maf.JPG
    16.6 KB · Views: 3
OP
OP
vjjack04

vjjack04

Enthusiast
Joined
May 18, 2013
Posts
24
Reaction score
2
Location
Hereford AZ
MoparMap,
Here are a couple pictures.
 

Attachments

  • 20250506_073329.jpg
    20250506_073329.jpg
    78.8 KB · Views: 5
  • 20250506_073444.jpg
    20250506_073444.jpg
    66.2 KB · Views: 5
  • 20250506_073725.jpg
    20250506_073725.jpg
    98.2 KB · Views: 5
  • 20250506_073802.jpg
    20250506_073802.jpg
    98.8 KB · Views: 4
OP
OP
vjjack04

vjjack04

Enthusiast
Joined
May 18, 2013
Posts
24
Reaction score
2
Location
Hereford AZ
NVViperTech, thank you. I really just want to get a couple connector, take it apart and use what I have existing....as you can see, I broke the clip. It still works without it, but it bugs me.
 
Last edited:

NVViperTech

Enthusiast
Joined
Dec 7, 2003
Posts
12
Reaction score
0
Location
Las Vegas,Nevada
You might be able to search on mouser.com with those numbers on the body of the connector. I can't see the numbers clearly otherwise I would check it for you.
 
Top