AllBlack
Enthusiast
So, my car finally came back from the audio shop, Audiolines. Though the wait was long it was SO worth it. So let's get to it. I had the shop make a replica mould of the panel that rests behind the seats, and curves into the middle, where the stock sub sits. They then made a new panel from that mould, out of carbon fiber, and modified it to fit a sub box for two eight inch subs. The box was made out of fiberglass, and painted a gloss black as a finish. Just for the hell of it, I asked them to replace the top door panel in carbon fiber, as well as the foot panel that is next to the seat and below the door. So, the carbon fiber wraps all around the car and I think it adds a lot to the interior. Every speaker was replaced with Focal K2P series. The Subs are from the Utopia series, however, because two eight in subs were the largest combination of two they could fit in the center, while it still is comfortable for me to shift and move around etc. I could have gone with one ten, but I liked the look of the two eights better. Lastly, I asked that a replica of the Viper logo be made in plexiglass, and lit up with a neon glow. So, in the last pic, that logo lights up red whenever the system is on.
As far as the system goes, I am amazed with the sound quality, power, and loudness of the system. I wouldn't go with anything but Focal speakers from now on. My shop said they had a very difficult time doing custom carbon piece that big, as they had to redo it three times because the layout of the carbon sometimes had folds in it, or other defects. There are still a few pieces missing... as you can see, the metal part of my roll bars are visible, and there are pieces being made to cover this... Also I'm getting some other pieces fabricated, but I wanted my car back, because I was going through withdrawl.
I will post all the parts, model numbers, and any other information or questions you guys have about the system. This was a quick write up so I hope its alright, and enjoy the pics... tell me what you think.
As far as the system goes, I am amazed with the sound quality, power, and loudness of the system. I wouldn't go with anything but Focal speakers from now on. My shop said they had a very difficult time doing custom carbon piece that big, as they had to redo it three times because the layout of the carbon sometimes had folds in it, or other defects. There are still a few pieces missing... as you can see, the metal part of my roll bars are visible, and there are pieces being made to cover this... Also I'm getting some other pieces fabricated, but I wanted my car back, because I was going through withdrawl.
I will post all the parts, model numbers, and any other information or questions you guys have about the system. This was a quick write up so I hope its alright, and enjoy the pics... tell me what you think.
You must be registered for see images
You must be registered for see images
You must be registered for see images
You must be registered for see images
You must be registered for see images
You must be registered for see images
You must be registered for see images