Need tool for rear calipers on 94 RT....

[VIPER BAZ UK]

This car is begining to p1ss me off all i wanted to do was upgrade the brakes..
Discs and SS lines turned up no worries.....
Took front apart went to undo rubber flexi hose nut rounded off.......
Started to take rear apart rubber hose came off fine all seems OK then i find out i need a special tool to wind in the rear piston.....
And i havnt even started the other side or got the rounded nut undone !!!!
Can anybody PLEASE PLEASE tell me where i can get this tool...
Many thanks
SAD BAZ

 

[viper_man40]

I used a pair of needle nose pliers. They work great. Just push in and turn at the same time and the piston will retrack back in. It is easy. Good luck.

 

[Neil - UK]

I'll take it as it is, 15 grand best offer

get back to it, only 3 weeks till the next meet

 

[95Viper]

I think the ABS Vipers are more sensitive, a 94 only requires a steady hand and needle nose pliers. Easy.

 

[Chuck 98 RT/10]

Contact Chuck Tator 914-763-3136 [email protected]

He has the tool you need. In the meantime use needlenose pliers like Vman40 recommends, although don't be too certain that the piston will retract with ease.

 

[RobHook]

I have a couple of these tools in my inventory but neither of them fit my '94 Viper. I found that needle nose pliers worked better anyway.

--Rob

 

[VIPER BAZ UK]

Cheers guys needle nose pliers did it bit awkward/tight but done the job...
Just need to get that nut off now...
Dont feel so p1ssed now this forum is great