Remote problems help

[v10sloboy]

I just finished my water **** and went to start the car and the lights started flashing. The remote does not respond and the lights continue to flash. 1 how do you program the remote on the gen 1 and 2 do you think I may have another problem?

 

[v10sloboy]

found out how to program the remotes but they do not respond is there a way to bypass the alarm module or reset it besides removing the battery thanks john

 

[Steve-Indy]

John, I MIGHT be of some assistance, but I see that you do not have an e-mail address. Feel free to send me your phone number in an e-mail.

 

[Vipera]

If you press both buttons on the remote at the same time for 10 seconds it will reset it. I found this out the hard way... If that doesn't work, their is a bypass inside the glove box on the top. You will need to use your key to bypass the alarm. Good luck.

 

[v10sloboy]

I tried to reset the remotes with no success. My cell is 678 296 9099 if you want to give me a call