ROE Gen1 at the track?

[00SVTdubs]

Anyone run a gen 1 with a roe at the track? Im curious to see what boost and et/mph.

 

[martyb]

Eric,

I Gtech'd mine last month, ran 133mph, which I know is high for my car with 551 rwhp. I would guess I am in the 127-129 range at the track.

martyb

 

[FikseGTS]

depends on which pulley it's running, here is a GEN II roe car pulling 135MPH:

http://www.dragtimes.com/Dodge-Viper-Timeslip-4997.html

.

 

[1TONY1]

Eric,

I Gtech'd mine last month, ran 133mph, which I know is high for my car with 551 rwhp. I would guess I am in the 127-129 range at the track.

martyb

You can run 133 no problem

 

[00SVTdubs]

depends on which pulley it's running, here is a GEN II roe car pulling 135MPH:

http://www.dragtimes.com/Dodge-Viper-Timeslip-4997.html

.

5psi and n20

 

[martyb]

1Tony1,

I would figure it would take about 610-620rwhp to get into the 133mph range. I am in discussions with PBJ about heads/cam on my car, we shall see!!

 

[00SVTdubs]

if u end up going to pbj, give me a ring. Ill drive up there so you can drop it off and get a ride back with me. I emailed him about the blower and stuff because I may have found a car.. check your pm's marty!

 

[1TONY1]

1Tony1,

I would figure it would take about 610-620rwhp to get into the 133mph range. I am in discussions with PBJ about heads/cam on my car, we shall see!!

A gen2 with headers/exhaust/gear can run in the 123 range and you have over 100 more rwhp. I still think you can do it...may have to bang some gears but it can be done.