Stage III Heads

[V10 MOJO]

anyone have any input on the stage III heads from west coast viper? seems like a good upgrade and substantial power increase

 

[BYT U L8R]

I did my heads through west coast viper. Still spinning the tires. I will never go any place else for Viper work.

I can't remember what all you've done to your car, S/C and all that, but call John Horton at WCV and he will be able to tell you what what expected increase you should see along with the other goodies you could use to see the full potential of your mods.

Ask him about his new intake...

 

[V10 MOJO]

they also have some nice asss billet valve covers and since i was just recently disgusted with my current valve covers filth, it just may work out to his advantage for a purchase of a set.

 

[BYT U L8R]

I am trying to swing a large HP increase with him in the near future and he really has things figured out. Prices are much more reasonable for the HP I want compared to others.

His dry sump system is very impressive!!

 

[Anthony - 98 GTS]

I have a set of Stage III heads and a matching cam for sale that came off my motor after only 250-300 miles. The heads include the following:

- Hand Polished Combustion Chambers
- 65 cc Combustion Chambers
- 2.02 in. Stainless Steel Intake Valves
- 1.60 in. Stainless Steel Exhaust Valves
- Titanium Retainers
- Extreme Duty Valve Springs
- 3-Angle Valve Job
- Upgraded Bronze Valve Guides
- Complete Assembly

Please send me a PM if you are interested. Both the heads and cam are off the car and ready to go.

I was making around 560-570 rwhp with this combination.

 

[Diablo Joe]

You have mail.

Joe

 

[Anthony - 98 GTS]

Thanks for the interest. Responses sent.

 

[GTSnake]

I bought my heads directly from the supplier that supplies WCV. I picked up 80 RWHP from adding T&D RR and the heads. Mine are the stage III as well. I'm guessing that the roller rockers added about 20 but the heads contributed around 60. I love mine.

If you do the roller rockers too make sure you get the green stripe push rods since the heads are milled.