Warning: PolyBushings motor mount failure!

[klamathpro]

WARNING REGARDING POLYBUSHINGS.COM MOTOR MOUNTS!

This is after about 1500 miles. I thought something was wrong when the shifter started to move to the right, but I figured it was the poly tranny mount. Ended up being a completely failed driver side mount. I was going to take them out to get a Woodhouse set when I discovered this. No flange inside or anything, just poly bonded to the plates.

You must be registered for see images attach

You must be registered for see images attach

 

[RedSrt007]

same thing happened to mine...

had my buddy make me a set of 6061 billet mounts...all is well, such minor vibration you dont even notice.

 

[ViperTony]

I originally purchased the Poly mounts and I sent them back after I received them. I went with Woodhouse mounts. Completely different and you can see the difference in my write up on engine mounts in the how to section, 3rd post: http://forums.viperclub.org/illustrated-upgrades/603840-engine-mount-install-guide.html

If Woodhouse mounts didn't exist...I would've went back to the stock rubber mounts.

 

[0209 CLK]

So glad I returned my set and went with woodhouse mounts. Supposely John at PB came out with a "newly" designed motor mount that almost looks like a set of woodhouse mounts not sure if they will hold up though..

 

[plumcrazy]

just another thing for me to check sat when i go under mine. thanx for the heads up