Search results

  1. S

    Anyone going to Carlise?

    I will be there if the weather's good. Hope to see you guys there. Tim
  2. S

    Are there any good Viper mechanics near Pittsburgh, PA

    Wexford Dodge on Rt. 19. They installed my headers, exhaust, nitrous, half shafts and many other things. The service manager is Frank and the Mechanic is Larry. Not cheap, but they do HIGH quality work and know a ton about Vipers. Tim
  3. S

    Are any vipers going to Carlilse this year?

    What days is the Carlisle event happening? I am interested in attending. Thanks, Tim
  4. S

    The new grocery getter arrived today! (PIC)

    It is finally here! We ordered her in September of 1999. I got to drive it today, and all I can say is WOW!! It is unbelievably fast. It doesn't seem to have the torque of the Viper, but when it hits about 3,000 RPM, it really gets going. I used to think that I'd easily beat one of these on...
  5. S

    Have you Been Ticketed with Your Valentine One?

    A few weeks ago, I was on my way to have my Viper dynoed, and got pulled over going 75 in a 55 with the Valentine One on. It beeped like crazy when the radar hit me, but it was too late. A PA State Trooper was shooting radar from a large yellow PennDOT truck...and there were cop cars parked...
  6. S

    Quick question about a viper gas cap

    I would get a gas cap soon...I forgot to put mine back on at the gas station, and gas spillied all over the side of my Viper, and when the gas collected dust on the way home, it was EXTREMELY hard to remove. Tim
  7. S

    Viper Stickers?

    I recently purchased a Sloan Kwik Load Trailer. Does anyone know where I can purchase some Viper stickers to put on the wind ferring? Thanks, Tim
  8. S

    So, interested in a trailer for my car

    I just purchased a Sloan Kwik Load---highly reccomend it!! Tim
  9. S

    BTR Nitrous Results II and Mopar Perf Comp. Results

    I had my 98 GTS dynoed again today in order to tune the nitrous system. Two weeks ago I had it dynoed and the a/f ratio was at 13, which was too lean. Today, we experimented with the propane jets...I had a 26 in it, and we tested with a 30 and a 32. Also, I dynoed my car with and without the...
  10. S

    Nitrous/Propane Dyno Results

    I ran the largest jets and got 575 hp and 648 torque. Tim
  11. S

    Viper bashers....

    Here's a thread from another message board that is bashing Vipers... http://www.turbobuick.com/bb/Forum13/HTML/011460.html
  12. S

    Dyno results & information on performance computer

    I am having my car dynoed again this Saturday as well. I have the Mopar computer...I'll make a run with the stock one and post the results. Tim
  13. S

    BTR / TOM Welch

    I have had nothing but GREAT experiences with Tom Welch and BTR Viper. I recently had his nitrous system installed on my 98 GTS. He answered questions for my Viper tech and answered questions when I was having my car dynoed. Also, some parts of the kit were damaged during shipping, and he...
  14. S

    Best drag radials?

    I reccomend Purner's setup with the Micky Thompson ET streets and skinnies. The only problem is that this setup will cost much more than just putting drag radials on your Viper's stock wheels. There may be a set in the classified section of the VCA website. Also, I reccomend BTR Viper's...
  15. S

    Disappointing Dyno Results - Help!

    I recently had my car dynoed on a "Mustang" brand dyno...it said I had 360 hp and 368 torque...it also said I has 10 less horsepower with my nitrous switch on! I reccomend using a DynoJet brand dyno...they're extremely accurate...I had a less than a 1 hp difference from run to run when I had...
  16. S

    Nitrous Dyno Results

    I am using the fuel enrichment controller supplied with the BTR kit. We did in fact make a run with the bottles off and the nitrous switch on-to check the fuel enrichment controller and it was working. I don't remember the exact numbers, but I think the a/f ratio went into the 11's with the...
  17. S

    Nitrous Dyno Results

    We were concerned that the fuel enrichment controller was not working, but we ran the car with the bottles off and the switch on and it was indeed working. I am using the normal BTR setup that he sells from his website...the propane I have in the bottle is from the local propane supplier...I...
  18. S

    BTR Cones vs Smooth Tubes & Stock Box

    John, This kit is made by K&N. I ordered it from my local auto parts dealer by getting the parts number from K&N. Tim
  19. S

    Nitrous Dyno Results

    I realize that I would have gotten more horsepower if I had gone past 5000 rpm with the nitrous on as the car was making the most hp around 53-5400 rpms. Tom Welch told me to not exceed 5000 rpm on nitrous for safety reasons. I did not get a printout of the a/f ratio, but when I go back in 2...
  20. S

    BTR Cones vs Smooth Tubes & Stock Box

    I have the K&N setup. Both kits are similar in effectiveness and price. I highly reccomend Tom to anyone-he's a great help and his customer service is excellent. Tim
  21. S

    Nitrous Dyno Results

    Approximately how much Horsepower do I lose throughout the drivetrain? Tim
  22. S

    Nitrous Dyno Results

    I had my car dynoed with the BTR Viper nitrous kit yesterday. Max hp without nitrous=421.5 Max torque without nitrous=466.3 Max hp with nitrous=575.8 Max torque with notrous=648.1 The nitrous gave me 154.3 more hp and 181.8 more torque. I had the largest jets supplied with the kit installed...
  23. S

    For the Ride of Your Life...GET NITROUS

    DRYVEM, This was the first time I've driven the car on the bottle. I can't wait to try it out with my Purner slicks/skinnies... I had my Dodge dealership do the install..I'm good friends with the Viper Tech there. They did a very high quality job, but I think they charged me too much...
  24. S

    For the Ride of Your Life...GET NITROUS

    I just got back from the first drive in my BTR Viper nitrous equipped GTS. It is aboslutely AWESOME!! I've never experienced such a rush in my life! I tested it on the on ramp of the local Interstate...the wheels were spinning through the first three gears! When it grabbed in fourth, I...
  25. S

    Mid Ohio 2 day advanced school before Viper days

    I plan on going to the Mid Ohio event...I will also probably sign up for the advanced school. Where are you staying in Ohio, and have you ever been to a Viper Days event before? I haven't, and I still have to sign up. I'll probably do it this week. Tim

Latest posts

Staff online

Members online

Total: 943 (members: 14, guests: 929)

Forum statistics

Threads
153,836
Posts
1,686,661
Members
18,448
Latest member
JpKL

Share this page

Top