Search results

  1. M

    For Sale: Roe Surecharger, Ported heads, Belanger headers

    Thanks to Larry Macedo I have the following parts for sale. I'm going with a TT, Heads, and cam. All of these parts are still on the my car and will be removed around the middle of June. If you would like professional instillation contact Larry directly [email protected] as he will be removing...
  2. M

    Who is going to be the first to run Nitrous with a Roe Supercharger???

    Just curious if anyone has done this or is planing on running a small shot (75 HP) on a Roe supercharger? Just the cooling effect alone would add a nice kick. Using two 35HP jets (one per TB) running a dry shot with just the fuel injectors for enrichment seems like an best way to go. Probably...
  3. M

    nitrous colder plugs-

    I've used NGK plugs for 10k miles now (2 sets at 5k each) and had no problems. I've never noticed a sound change in the exhaust over stock plugs. If you do have a quieter car maybe one of your old plugs were going bad I wouldn't be concerned about the noise reduction as long as the car is...
  4. M

    Center Force Dual Friction Clutch

    Let us know how it holds up when you get that supercharger installed. I've heard they can't handle the power like a stock clutch can. I thought about getting one but wasn't sure if it would last.
  5. M

    Moroso Results

    We had the annual Viper shoot out at Moroso today. There were about 10 Vipers, and quite a few running nitrous. I can't remember everyone times but here's some highlights & pics. The solid cam Viper was there he did not use spray but ran all motor. He was having clutch problems so couldn't...
  6. M

    first 10 -> 10.88@129

    Just got back from the track with my first 10 sec run (slip below) not the best time in the world for my mods but I'm happy to have broke into the 10's I drive like an old lady so don't be too harsh I'm sure with some more practice and some faster shifting mid 10's should not be a problem.
  7. M

    New track #'s!

    Re: New track #\'s! <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR> assuming I could have extended this 7.19 run out to a ¼ mile what would the e.t. be? I think at least an 10.90 because I cut almost 6 tenths off of my 1/8 mile and that should translate to cutting more than 6...
  8. M

    Anyone going to Moroso? Viper shootout 9/15

    Just curious if anyone from here is going? Haven't heard any talk of it nor anything from the South FL VCA regarding the show. I'll be there and I'm going to get some practice this Wednesday night if anyone else want's to join
  9. M

    Exhaust question...... again(sorry)

    I've had both and they are not even close as far as the sound goes. The Corsa is the quietest possible cat back and the Belanger is the LOUDEST possible cat back. I'm not sure why you narrowed it down to these two systems as they are complete opposite of each other. BTW there is no difference...
  10. M

    Upgraded rear axle??

    Anyone know if there is a stronger rear axle? Isn't the Gen II a super dana 44? and isn't the dana 44 used in Vettes? I would think there would be some hardened gears and internals that someone makes I remember talking to JonB (partsrack) some time ago and he said Unitrax had a micro polished...
  11. M

    Autotap

    I have AutoTap it works on a Viper but seems kind of flaky. Gets disconnected for no reason at times You could try Roe Racing, they sell something similar (for all I know it's the same thing) I just would recommend something other than AutoTap if you can find it.
  12. M

    If styling doesn't matter how do you explain this...

    If styling doesn\'t matter how do you explain this... Cars produced per year ----Viper ZR-1 '90 zero 3,049 '91 zero 2,044 '92 285 502 '93 1,043 448 '94 3,083 448 '95 1,577 448 '96 1,887 zero Both cars were priced about the same, had similar performance, 1/4 mile, top end, etc. Yet look what...
  13. M

    Corsa or Mopar Catback?

    You will find alot by searching but to sum it up Corsa = quietest & no drone Borla = louder & drone
  14. M

    I need some Viper blue paint - any ideas?

    Well I'm told touch up paint from Dodge is not kept over 3 years so I can't get any I need some 97 blue paint for 2 small areas - rock chip on hood (1/4") and a nice scrape on the bottom of the front facia (2") Anyone have a spare they want to sell? Maybe mix some up at a body shop? but the...
  15. M

    Can we get one of these??

  16. M

    GEN III spy photos of the new GTS - within

    So what do you think? Still looks like a Viper, no confusing this car for a S2000 or a Camaro. . . . . . . . . . . . . All right... This is actually the new body kit from Autoform, so it's not really the next GTS. However this is what I imagined it would have look like prior to seeing the...
  17. M

    How do you like your filter?-KN/SB/Stock/Other

    Get a set of S&B's and smooth tubes from Roe Racing, that's what I have. I hear the K&N's don't fit very good and have less surface area (but I have no first hand knowledge). Dodge would not have put K&N filters into the ACR Vipers without testing first, so I would say they are safe to use.
  18. M

    Best place for head work

    I want to get a set of heads, Viper heads that is. Anyone have opinions? I want a new set (either new Mopar or a used core) because I want to keep mine factory original. I want a complete new set (or used core) along with all the hardware, springs, rockers, valves, install kit (bolts, gaskets...
  19. M

    EBC Greens burning rotor?? opinions (pic)

    Pic below is of the front rotors. I replaced the rotors & pads about 500 miles ago. The rotors are stock and the pads are EBC greens. Is this normal looking? it looks burnt to me? Both sides are the same. I don't know exactly when this occurred but I now have about 500 miles on them. I did do...
  20. M

    SVSi 1000 HP twinturbo

    "Vaporware" as far as I know. Nobody (that I know of) has ever installed that TT If you want some big power talk to DLM he is the only one that can make anywhere near that HP and probably much less than $65K If you want a TT contact BTR as they are working on a TT package $20k?? Oh and what was...
  21. M

    Which Brand of Cat?

    Just MHO PartsRack RT cats - fit great, very small, nice sound reduction Roe 3" oval cats - barely fits, fairly big, very little sound reduction I've used both and like the RT cats best because they reduce the noise more and fit better than Roe's. Now these were both 3" cats so I don't know...
  22. M

    Header question...

    I'm sure your going to get various replies but IMHO there is not a tremendous difference between headers. I have listed 75 dynos with mods & rwhp including many different headers. Click on my web site link below and at the top click on "Dyno Results"
  23. M

    it is a grey day :(

  24. M

    Part # for rear o2 sensor 56041004??

    Can anyone tell me if that p/n is correct? I have a new o2 sensor for my 97 GTS and it looks nothing like the old o2 sensor which is bad. Got it from a local dealer p/n 56041004 the # is on the sensor and the outside of the box. Thanks
  25. M

    Front Facia

    Look for the 3 small slots in the front facia where the clear plastic covers would go. It could just be somebody removed the clear covers.

Latest posts

Members online

Total: 1,100 (members: 10, guests: 1,090)

Forum statistics

Threads
153,217
Posts
1,682,049
Members
17,711
Latest member
techanvi

Share this page

Top