Search results

  1. P

    NOR-CAL COASTAL CRUISE – Saturday, August 6th - Vipers & Corvettes

    Well that's typical. I've been home the past 2 weekends, but I'm leaving town on friday. I live about 2 min from frantoio's. Bummer!
  2. P

    Effective Octane booster

    I use Torco and it helps in my Saab. I also put it in the viper but I really can't tell the difference because the car runs great with the super charger as is. I can adjust timing from inside the car on the saab. I was able to decrease the amount of timing being pulled out of the car by almost 3...
  3. P

    Water/Meth injection thoughts on Centrifugal chargers....

    Instead of that, give this a try: http://www.seinesystems.com/MPC-Home.htm Spray your IC, this is a proven way to cool down the air. I have one on my turbo saab and it works great. Yeaaaa, I know it's a saab and not a viper, but the principle is that same. That with water injection I'm easily...
  4. P

    help with deciding fuel pumps..pics inside...

    I have 1 255 pump in my car now. I have seen how it is mounted and such in the fuel tank, but how in the heck do you mount 2 in there? With 2, how do they supply fuel? In other words, how are they plumbed? The outlets on them are pretty damn small. Does one at this point install all new lines...
  5. P

    Water / Methanol Injections Kits Ready Soon

    Thanks-found it. I must have looked at that site 10 times and missed those zip files.
  6. P

    Water / Methanol Injections Kits Ready Soon

    Can anyone tell me how or where to get the vec 2 software? I have a bunch of blank cars and a reader/writer for them, but no software because it was never given to me by the tuner. Thanks
  7. P

    Water / Methanol Injections Kits Ready Soon

    With a paxton kit, or part there of, anything that cools the intake temp is a "god-send". I run 91 pump gas (ca) and I'm at the edge when it comes to a\f ratio. I really don't want to put the car in the shop again and have another fuel system installed. I do not run paxtons "cob-job" of a fuel...
  8. P

    Water / Methanol Injections Kits Ready Soon

    Answered my ?'s How do i sign up? I'm sure I can make it work on a paxton car????
  9. P

    Water / Methanol Injections Kits Ready Soon

    Seems like a great deal to me, and a great idea. The only prob. I see is the long line from the rear of the car to front. Potential for air bubbles which is not a big issue, but something to think about. Not sure when water would be injected-I know the controller will do that, but on a car...
  10. P

    wideband O2 going bad? How do you know?

    Just a word to the wise, do not forget to re calibrate these before you log data. You would be surprised how much the readings can "drift" when these devices sit for a while. I'm no expert on this subject, but when I put one on my other car and logged data a few times, I thought I was ok a\f...
  11. P

    Found this note on the windshield of my GTS

    2 girls came up on side of my car and yelled out that they love my car. Next stop sign they informed that one of their mom's drag races up at sears point. 10 minutes later I'm parking my car in the garage and here they come. The thoughts that went through my mind while they were checking out my...
  12. P

    Dyno ?

    Thanks for the info. Your right about the ferrari guys. It's the hot roders and racers I'm hoping to grab. With sears point so close there are a hell of a lot of race cars being built from old datsuns to new porsches around here. But, the more I think about it the more I wonder if it's...
  13. P

    Dyno ?

    Hmmmmm... So dynojet on one side and mustang on another. Are those the only 2 types available? The one I saw at seas point was mounted in the ground. Some superduper constant load thing that was about 3 times the amount that I'm finding on the internet. So lets say that half the people that come...
  14. P

    Dyno ?

    I live in an area where there is a lot of money and a lot of nice cars. We have hot rod shops, race shops..... but the closest dyno shop is at sears point which is an hour away. Matter of fact all dyno's are over an hour away. So I'm thinking of buying one and setting up shop. I have seen a few...
  15. P

    Boost gauge ?

    Thanks guys! I know what you mean about not looking at the gauge when it's located in certain places. I have one installed in another car (left side of dash) and it took me god knows how long before I got comfortable enough to see how much boost I'm achieving. With this beast, the only time I...
  16. P

    Boost gauge ?

    2000 gts. I would like to install a boost gauge. I have a shift light located in between the tach and speedo. This would be easy to put somewhere else since it's so small. I would like to place the boost gauge in it's place, or mounted on the steering wheel plastic housing. Has anyone done this...
  17. P

    Looking for good Pistons, wrist pins, rings, bearings

    http://www.cppistons.com/
  18. P

    Inovative Car Theft

    You need more then just a key to start my car. But them thieves will steel it if they really want it, and they are good at it.
  19. P

    I Want My MIS ( Meth /Water Injection System)

    This is an amazing price for a system like this. I would like to know If I can make it work with the paxton kit I have using the vec II software I also have. I'll email you sean. I would also like to add that I have an aquamist system on my turbo saab. I know were talking apples to oranges, but...
  20. P

    Car will not start..

    Yep, there's power to that wire for about a second or so, then no power. That sucks because the pump is only 5 weeks old and not stock. On a trailer it goes and back to the tuner. So for the last 4 months I have driven the car three times. It was in the shop for 3, got car back and drove it 3...
  21. P

    Car will not start..

    Pulled cover over fuel pump. Pulled fuel pump plug and tested each pin in plug. Had my gal turn key on and off while I tested each. No power to any pin except the green and white wire. Turn key on, fuel pump relay clicks, power at green and white wire, half a second later or less fuel pump relay...
  22. P

    Remove clear powdercoat from rims?

    The rims on my porsche are powerder coated black. You must polish them or they will fade, and pick up other gunk just like paint on your car-just not as bad. That's the first thing the painter said tme.
  23. P

    What causes your exhuast to pop and burbble on deceleration?

    It's to much fuel. Mine did not do this with the f-up paxton fuel system. It now does it with the vec II though. My car also loads up a little now. But Right now I would rather have this car run rich then lean.
  24. P

    Hmmm.......What is YOUR story with your username?????

    my story is that if my car was running it pullshard in any gear.
  25. P

    Car will not start..

    Thanks Ulysses-I'll check that tonight. Does anyone have a method of checking power to Fuel pump?

Latest posts

Members online

Total: 742 (members: 6, guests: 736)

Forum statistics

Threads
153,200
Posts
1,681,922
Members
17,698
Latest member
Tombala

Share this page

Top