anyone here had any problems with harland sharp rockers?
- Thread starter anton28
- Start date
v10kingsnake
Viper Owner
best set=jesels.
they are probably overkill though for the hp output from a Roe. I would suggest saving several hundred and going with T&D's or mopar rockers. But again Jesels are the best you can buy.
they are probably overkill though for the hp output from a Roe. I would suggest saving several hundred and going with T&D's or mopar rockers. But again Jesels are the best you can buy.
R
RTED
Guest
Mike at Roe Racing recommend the Harland Sharp rockers indicating that unless I was planning on driving the autobaun at high speeds for long periods of time, the HS rockers where the best bang for the buck. He indicated they use them all the time. No problems after nearly 10k miles.
D
DAMN YANKEE
Guest
Jezels for 700hp plus and people that actually drive their rigs H-A-R-D.
Under 700hhp? Harland Sharps aren't just good, they are excellent. There are some good threads one can find on this topic including excellent remarks buy Greg Goodheads. Do H&S have limits? Yes. Are they excellent in the right application? Yes. I use them and they are just great. Sean wouldnt sell them, Tator wouldnt recommend them if they had any flaw in their right application.
Under 700hhp? Harland Sharps aren't just good, they are excellent. There are some good threads one can find on this topic including excellent remarks buy Greg Goodheads. Do H&S have limits? Yes. Are they excellent in the right application? Yes. I use them and they are just great. Sean wouldnt sell them, Tator wouldnt recommend them if they had any flaw in their right application.
Last edited by a moderator:
dave6666
Enthusiast
I bought a set of Harland Sharps brand new and they were full of metal shavings.
Other than that, no problems.
And what happened next is what?
D
DAMN YANKEE
Guest
Metal Shavings? You bought a brand new set and they had metal shavings in the original package? These come beautifully packaged, it would pretty hard to package them with shaving all over them without it being very purposeful. They are also retty simple items, when you say "full of", what do you mean? Where did you buy these rockers?
GTS Bruce
Enthusiast
Drag,circle,road,racers use JESEL.Engine is expensive.Jesel is cheap peace of mind.Roe has them and the pushrods you will need. GTS Bruce
D
DAMN YANKEE
Guest
Hello....filled with shavings?
dave6666
Enthusiast
D
DAMN YANKEE
Guest
Now, I get it he is "VIPERLESS".
That's correct. New in the sealed packaging and they had metal shavings in them. Guess I should have taken pics for the non-believers. I had to clean all of them before installation. And no, it didn't go boom. Like I said, they installed fine and I have had no problems with them. The car has gone 10.80's and 171mph on the road course. However, if I had to do it over, I'd get Jezels.
D
DAMN YANKEE
Guest
Viperless, you are a good man. If I had bought new H&S and they came with anything like that I would have been on the phone with them in about 3 seconds. By the end, they would have given me a set of rollers for free. You're a good man. Astonished.....never heard of anything like it before.
In hindsight, that's probably what I should have done.
PKH2552
Viper Owner
Not sure if this is appropriate, but I've just listed a set of T&D's in the classifieds.....
v10kingsnake
Viper Owner
Capitalism at it's finest. I have T&D's in my UGR Paxton rig pushing well over 900 rwhp.
00prowler
Enthusiast
I had pubics in my Jesel"s...
whitebluevipe
Enthusiast
so it says on Roe racing website that HS rockers gain about 20 hp. so what would the gain be with forced induction?
PKH2552
Viper Owner
sorry, my bad. Just been informed that the set I have are Harland Sharp with T&D rods, not T&D complete.
Greg Good Cylinder Heads
Enthusiast
Anton28, if you have a 708 cam and stock springs you'll be alright. If you have a more agressive cam and stiffer springs I would get Jesel or T&D rockers. They're much more rigid.
Similar threads
