Can someone help me figure out compression using thicker Head Gaskets

[vegasviper]

On GTS engine all stock assuming i have 74cc head chambers.

I need to know compression with .20, .30, .40 thick Head Gaskets



Thanks

 

[Doug Supercharged Vipers]

On GTS engine all stock assuming i have 74cc head chambers.

I need to know compression with .20, .30, .40 thick Head Gaskets



Thanks

.020" = 10.48:1

.030" = 10.25:1

.040" = 10.04:1

.050" = 9.83:1

.060" = 9.63:1

.070" = 9.45:1

.080" = 9.27:1

.090" = 9.09:1

Good Luck!

Doug

 

[vegasviper]

Thanks Doug, what is the factory Head Gasket thickness?

Also, am i correct on the 74cc factory Head Chamber

 

[Doug Supercharged Vipers]

Thanks Doug, what is the factory Head Gasket thickness?

Also, am i correct on the 74cc factory Head Chamber

Your welcome, make sure you recheck my correction.

The factory head gasket is .054" crushed or compressed.

The stock chamber cc's vary from .073 - .075"

Hope this helps.