Gen 1 Seat Question

[VipeRiz]

My 93 passenger side seat only slides about an inch, if that. So, I'm able to move it 1 notch on the track. Is that normal or is there something wrong with mine? I have the seat out and both tracks on that seat do the same thing. There's a lot of notches on the track so it seems like it should be able to move more than what it does. The drivers side seat has been changed to a lowering kit so I have nothing to compare it to.

 

[jsalloum23]

My 94 is the same way. Hope someone can answer this.

 

[maverickagm]

I have an early 93. I can measure the travel when I'm home.

 

[99RT10GTS]

You can pull the seat out and bend the stop out of the way, then it will move farther up.

 

[VipeRiz]

You can pull the seat out and bend the stop out of the way, then it will move farther up.

Have you done this? I have my seat out and it looks like what's keeping it from moving is a rivet/stud that attaches the leg to the track. That's at the back of the track. I thought about drilling it out but I'm pretty sure the leg would detach from the track. The front of the track it looks like a spring inside the track that is hitting the rivet/stud. I'll try to get some pics tomorrow.