Gen 2 96 R/T alarm dismantle

[Robin747474]

What's up, looking for some feedback have a 96 R/T would like to permanently dismantle the alarm, it's fine as we speak, but it pretty touchy, like to just get rid of it for good, any suggestions, thanks

 

[Bill W]

It might be helpful to explain "pretty touchy." Understandable if it's an aftermarket alarm, but not a stock alarm. At least not to me, anyway.

 

[Steve-Indy]

Factory alarm on a Gen I (which includes the 96 R/T 10) can be disabled by a specific procedure.

 

[Robin747474]

Hello, Steve it is the factory alarm, and my 4th viper, with being the second 96 just a pain when taking to the shop especially when the workers engage it and I get a call how to disengage, easier just disable all together any info will be great

 

[Robin747474]

It might be helpful to explain "pretty touchy." Understandable if it's an aftermarket alarm, but not a stock alarm. At least not to me, anyway.

Nope just factory alarm just seems to engage more frequent then my other 3 previous, just a pain when it has to go to shop and I get a call of how to disengage when the alarm sets, rather just disable altogether any advice would be great

 

[Steve-Indy]

Give me a call at 317-402-9013 when you are ready.

Steve

 

[Robin747474]

Thanks Steve that will be great I'll get her ready and give u a call tom if that's ok work night shift

 

[Steve-Indy]

Anytime from 6:00 AM til 9:00 PM (EDT) is fine with me.

 

[Steve-Indy]

Good to speak with you, Sir...nice job.