Gen-4: Alternate 5/6th Gear Ratios. AVAILABLE HERE!

[Viper Specialty]

If anyone is looking for alternate 5/6th gear ratios for their Gen-4 or TR6060 transmission in general- give us a call!

We can change your Viper transmission to a .81 5th, and .63 6th, [effectively a "4.5 and a 5.5" gear by comparison] This is the most consistently spaced gearing option available for the Viper, even moreso than the new Gen-5 gearing which has an oddly spaced 3rd gear ratio.

Or we can offer the Viper Gearing of .75 5th, .50 6th into other versions of TR6060's


http://viperspecialtyperformance.com/catalog/product_info.php?products_id=186


We can sell the gears themselves for you or a transmission shop to install, or install them in your transmission at your option.

 

[Moundir]

What's the "special" or group purchase price? Also, how do the new gears act with a 3.55 rear end?

 

[Viper Specialty]

What's the "special" or group purchase price? Also, how do the new gears act with a 3.55 rear end?

Get me a pallet of transmissions delivered, and I will see what can be done

Personally, I would not run them with the 3.55, as I do not like how 3.55 feels 1-4 [This is completely subjective of course]. These alternate trans gears allow you to keep 1-4 unchanged on the 3.07, while having 5/6 as they would be with a 3.55 {roughly}. Of course, if you are happy with 3.55 on 1-4, these gears will form a much closer ratio transmission overall, without the gigantic 4-5-6 spacing.

Ideally, these gears on a 3.07 with Forced Induction cars, or on a 3.33 NA, would be perfection.

 

[Moundir]

Big question would be, will I lose any more top end in 5th than I already lost with the3.55s or will 5th gear feel like 4th

 

[Viper Specialty]

Big question would be, will I lose any more top end in 5th than I already lost with the3.55s or will 5th gear feel like 4th

Since you already have 3.55's, the answer would be that 1-4 will feel exactly the same as they do now, with 5th gear being like a "4.5" and 6th being like a "5.5"

 

[ACR steve]

Dan can you PM price installed?

 

[Viper Specialty]

No need to PM; it is roughly 1450.00 installed if the transmission is shipped in/dropped off, and can be done in < 5 days.