My Custom Roe Water/**** Tank. Check It Out!!!!!

[Jerry Colpitts]

Just had this done. We used a black co-polymer that is alcohol resistant. We put baffels inside the tank for when i autocross it will drastically cut down on the sloshing of the liquid. Put a nice side tube on for seeing how much juice is in there. We raised the height for maximum volume and ran a neck up and put it thru the molding. Put a real nice billet cap and sleeve and also put a nice bezel around our cut. Looks like it came from dodge. Also we have plenty of room to the side for air to excape the cabin!!!!! Check It Out........

 

[Earl_H]

You really need to produce and sell those.

 

[RX VIPER]

Very ingenious! Are those the current dyno numbers in your sig with this set-up?

 

[DAMN YANKEE]

Man, how nice is that!

 

[mbccenter]

You need to market them

 

[big-n-italian]

very nice! LOVE the sight gage!

 

[KenH]

Looks great! How much water/methanol does it hold?

 

[Jerry Colpitts]

Thanks Guys!!!! It holds as much as the roe bottle about 2 gallons the roe might be 2.5.

 

[Simms]

Looks great!

 

[GTSnake]

Look like it came from the factory. How is it attached? Did you drill into the trunk?

 

[Knight Viper]

Does anyone know anything about bladder bags(like the military use)? we could wrap one around the spare tire and keep the Center of gravity lower and not take up any trunk space???

 

[VIPER BAZ UK]

Well done Jerry,Nice neat and factory looking...

 

[KepRght]

Does anyone know anything about bladder bags(like the military use)? we could wrap one around the spare tire and keep the Center of gravity lower and not take up any trunk space???

the ones the military use for fuel in plane wings need replacing often & leak. if you can figure out a way to keep that from happening its a good idea

 

[1TONY1]

Very, very nicely done !!!!

 

[Jerry Colpitts]

It is held in place by the neck. I will post a pic before the install of the box soon...

 

[viprvenm]

That is very nice. I agree... you should produce and sell.

Great job.

 

[SYNFULL]

Any possibility of getting one of those w/m boxes made up?

Thanks

 

[Bobpantax]

I cannot tell from the photos whether the passenger side exhauster vent is blocked by this installation. Is it?

 

[mjorgensen Woodhouse]

Might be a great idea for adding coolant capacity for the Paxton intercooler system also huh? Wider neck so you can fill with ice and have a strainer screen to keep it flowing!

 

[treesnake]

Looks great. Is it vented?

 

[Jerry Colpitts]

Yes it is vented....and there is side room for the air to escape out the back....

 

[Madduc]

If you do decide to make them, I want one.

 

[Giampiero]

me too..............

 

[BOTTLEFED]

me three...

 

[SquadX]

Me four, five and six.

 

[dave6666]

Isn't it covering the cabin vents?