angleiron
Enthusiast
I have the day off, so figured that I would take care of the passenger side window as it stopped going up/down. When I activate the switch I can hear the motor, so that is not the problem.
I have pulled the door panel and found that the glass was out of its track/guide...so that is now back in place...but there is a lot of slop in the cable. There is a white piece of plastic with a spring attched to it that is attached to the cable that to loose...and I cannot figure out just where that goes or how to get tension on the cable. Any help out there?
I have pulled the door panel and found that the glass was out of its track/guide...so that is now back in place...but there is a lot of slop in the cable. There is a white piece of plastic with a spring attched to it that is attached to the cable that to loose...and I cannot figure out just where that goes or how to get tension on the cable. Any help out there?