Radio out of a Gen2....Will it work without the amp ? I have another vehicle I want to put a stock radio in, it does not have to be jammin/loud etc......just needs to work. tnx
Not likely, unless the other car had an external amp, and wiring would have to be run seperate or you'll need a custom harness. Your best bet would be to get a cheap head unit for the other car with a built in amp. Can be had for under $100.
According to the service manual..the amplification comes from the amp...so without an amp along with the unit..it shouldn't work. Plus, the radio is connected to the amp with a multi-pin connector. A good CD/Radio can be had in the aftermarket very cheaply, with an easier install.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.