I put EBC greens on the front of my Durango and 96 RT/10, have squeak in both, much worse than stock on the Durango, about
the same as stock on the RT/10...Concensous is I did not scuff the rotors enough, I scuffed the rotors with an orbital sander and conventional
sand paper (120 grit)...I am told I most likely did not get a good enough non-directional pattern onto the rotors...So I bought a 3M rotor
scuffing kit from the local parts store, but it works on a drill, so I have not read the directions yet, but hope to get to it soon...
On my RT, if I brake normal, I get squeak, quite a bit...If I brake harder, no squeak...
Tomer