Hi Everyone,
As you've all seen, we've been working to improve upon the Supercharger system over the last few months. The VEC2 was born right here just a few weeks ago and is doing everything we needed it to do, and then some. We appreciate everyone's input, patience and understanding while we worked to make the improvements.
We're in the process of building the second production run. This will bring us to 104 Supercharger systems. Over 30 of the second run are already spoken for with deposits. We've been very fortunate to build this many Supercharger systems as it has given us invaluable experience due to the range of cars, drivers and conditions.
The current price of the system is $6,995.00. Effective February 28th, the price will increase to $7,495. This is for the full system and includes the VEC2.
Shipping for the second run will begin in approximately 3 weeks as we're expecting another 75+ VEC2 computers to arrive in 2 & 1/2 weeks. We're not shipping any of the completed kits until they have VEC2's to go with them (unless specially requested to fit an installers schedule).
Other developments are as follows:
- Emissions certification paperwork is beginning to move again. We now have the test data showing the cold start open loop air fuel ratio and it is the same as the stock results. This was a major hurdle we could not overcome before the VEC2 was developed. It will however, still take some time to get certification.
- An H.O. (High Output) Upgrade is in being tested. This comprehensive package is for forged piston cars and includes all the necessary components to safely increase boost. The components currently being tested in the kit include, smaller pulley, shorter belt, smaller idler, larger injectors, fuel pump voltage booster and new Smart card programs. Load dyno testing is complete with street driveability tuning and full throttle dyno testing on the schedule over the next few days.
- Custom Smart Cards available. If you want a custom card for race gas, nitrous, etc, we can burn custom cards for you as needed. We have run over 100 programs and dyno tests with the VEC2 and can quickly configure programs curves to your needs. Custom cards will be $20 each, plus S&H. Quantity pricing available.
- Our shop equipment list is expanding. In addition to the Clayton load dyno and FJO wideband air fuel logging system we've been using, we now have Chip programmers / debuggers and a Tenma Oscilloscope with frequency counter and signal generator to do more in depth testing, tuning and development.
If you have any comments or questions, feel free to contact us by phone or e-mail.
Best regards and thanks for your continued support,
Sean
As you've all seen, we've been working to improve upon the Supercharger system over the last few months. The VEC2 was born right here just a few weeks ago and is doing everything we needed it to do, and then some. We appreciate everyone's input, patience and understanding while we worked to make the improvements.
We're in the process of building the second production run. This will bring us to 104 Supercharger systems. Over 30 of the second run are already spoken for with deposits. We've been very fortunate to build this many Supercharger systems as it has given us invaluable experience due to the range of cars, drivers and conditions.
The current price of the system is $6,995.00. Effective February 28th, the price will increase to $7,495. This is for the full system and includes the VEC2.
Shipping for the second run will begin in approximately 3 weeks as we're expecting another 75+ VEC2 computers to arrive in 2 & 1/2 weeks. We're not shipping any of the completed kits until they have VEC2's to go with them (unless specially requested to fit an installers schedule).
Other developments are as follows:
- Emissions certification paperwork is beginning to move again. We now have the test data showing the cold start open loop air fuel ratio and it is the same as the stock results. This was a major hurdle we could not overcome before the VEC2 was developed. It will however, still take some time to get certification.
- An H.O. (High Output) Upgrade is in being tested. This comprehensive package is for forged piston cars and includes all the necessary components to safely increase boost. The components currently being tested in the kit include, smaller pulley, shorter belt, smaller idler, larger injectors, fuel pump voltage booster and new Smart card programs. Load dyno testing is complete with street driveability tuning and full throttle dyno testing on the schedule over the next few days.
- Custom Smart Cards available. If you want a custom card for race gas, nitrous, etc, we can burn custom cards for you as needed. We have run over 100 programs and dyno tests with the VEC2 and can quickly configure programs curves to your needs. Custom cards will be $20 each, plus S&H. Quantity pricing available.
- Our shop equipment list is expanding. In addition to the Clayton load dyno and FJO wideband air fuel logging system we've been using, we now have Chip programmers / debuggers and a Tenma Oscilloscope with frequency counter and signal generator to do more in depth testing, tuning and development.
If you have any comments or questions, feel free to contact us by phone or e-mail.
Best regards and thanks for your continued support,
Sean