Water/**** Nozzle location

[litemup]

For you guys that are running water/**** and are using Paxton SC where are is the nozzle location. Is it before the blower, or after the blower? I called Paxton and they said to install the nozzle before the blower, but I've asked a couple of guys including my builder and they said to install the nozzle after the blower just before the throtle bottle. I'm confused.

 

[plumcrazy]

mine is a DLM setup but mine is already plumbed after the SC which is before the TB's.

 

[litemup]

DLM built mine as well. Do you have any pics of the location of the nozzle? If you don't mind could you post them for reference?

 

[plumcrazy]

your best bet is to call DLM. i dont have pics that show the nozzle location sorry.

 

[BOTTLEFED]

On turbos and centrifugal S/Cs you want the nozzles injecting after the air is compressed.
The **** will eat away, slightly, at the thin turbine blades. And you will get a better aftercooler effect if it is cooling the already compressed air.

 

[dun4791]

If you look closely you can see the 90 degree fittings after the throttle bodies going in from the sides on the intake manifold.

 

[litemup]

If you look closely you can see the 90 degree fittings after the throttle bodies going in from the sides on the intake manifold.

Sweet! Thanks for the pic and info.