I bought a bunch of Viper parts and was going through the boxes. I found this very detailed document and determined it was from Unitrax in California. I'm kind of assuming it is for a Yellow Box, but can't be certain. It's very detailed and I'm sure it will help someone in the future.
I took the car in to have the toe set this morning before a track weekend at COTA. This spring was on the Driver's floor next to the side sill when I got back to the garage. Nothing feels funny or makes any odd noises.
It's possible it was from the brake pedal depressor, or the steering wheel...
I have a flat spot on one of my 275-17 fronts. The rule of thumb is they don't heal themselves. I emailed JonB at PartsRack and had a new pair delivered within 2 days straight from the factory in S.C. Michelin may not be the most inexpensive choice, but the PS2s are the BEST road tires for our...
I had a bad synchro or blocker ring in 3rd gear, so I swapped in a known good transmission, put some new u-joint straps on and went for a spin. There's now a minor shifter vibration under accel/decel above 3k engine rpm. No vibe when declutched. Prop shaft was indexed to the diff yoke pre/post...
I was walking the lubes aisle this evening and found 5-qt jugs for the first time in 2+ years! Just under $28 per jug and quite a bit less than quarts. 0W40 was priced the same.
These are NLA from Dodge, but they were also used to support the intercoolers on mid-90's RAM-Cummins engines. The n ipples have two different diameters, but the flanges are the same. Has anybody seen something like this out there in rubber, or urethane?
It was a very happy (and HOT) August 14, 1993 for me. My third child had been born a little over a week before, then my gleaming Black '93 RT/10 hit the streets of New Braunfels and San Antonio WITH air conditioning! Lord that car was beautiful - and fun to drive on the track. I traded it 3...
Since this subject has come up repeatedly over almost three decades, I thought I would provide some verified user data for all to benefit from. The only ones I have yet to verify are the rear upper wishbones.
When replacing rubber bushings on a Viper, it is CRITICAL to follow the Service Manual...
...was 11 years and 5 days ago. Not many around here can top that one. I only have a little under 4000 posts. Chuck (my hero) has me beaten soundly there.
The State of the Union's Roads: An Investigative Report - Feature - Car and Driver
This is a very good article, and a pretty quick read. It is very timely in that the House and Senate are both working in their respective committees to draft new surface transporation authorization legislation...
Tired of those massive tires on your favorite snake "tramlining" down rutted roads? Mad about potholes ruining expensive tire sidewalls and bending your aftermarket rims? Sick of being stuck in traffic congestion that never seems to get any better? Then read on...
The incoming House Republican...
This is kalifornication/Obamination of the US at its absolute worst. It will kill what's left of our economy.
OPPOSE Waxman - Markey "American Clean Energy and Security Act (ACES)" Bill
Find your rep here:
https://writerep.house.gov/writerep/welcome.shtml
:usa:
It's coming - EPA/DOT joint transportation agency policy bill telling us when we can drive, what kind of vehicles, how much we will be allowed to drive and how we will be punished financially for being gross GHG emitters. This scheme will "reward" (force) high density development near transit...
I have aluminum wheels that are over 10 years old that have been mounted/dismounted at least 20 times. I'm seeing corrosion/oxidation in the bead area and I think it's causing some air loss. I have 8 wheels waiting on an answer before they get reskinned.
Any tips on corrosion removal and...
\'96 GTS Oil leak solved!!!
My tech spoke with someone at Arrow Racing about my incessant oil leakage problem. The symptoms and service history were recounted for consideration. Arrow's opinion was that the leak was likely NOT from the front of the engine, but from either the rear main seal...
There have been lots of questions from people wondering whether the cars will fit on a trailer, or a 4 post lift. Answer? No problem. My trailer deck is 81.5" wide, and the fender tops are 9.5" above the deck. Plenty of clearance for the sills and the doors. An added bonus is that the fascia...
I was skimming through the SRT service manual last evening. My impression is that it is not nearly as information-rich as previous editions. I noted that the mini-rollbars above the seats are easily removable. Access to the 2 bolts/hoop is through the same area where the 5-pt. shoulder harnesses...
I picked up a copy of Mopar Muscle off the magazine rack the other day. One article of great interest regarded the previous dilemma we Mopar types suffer relative to GM and Ford in the chip tuning department. It appears that Jet Performance and Hypertech are now in the business of supporting...
My guess? 5 weeks.
Next bet: What color will go down first? Red, Black, or Silver?
What an ignominious distinction for the poor (fill in the blank) who gets the boobie prize. Should we take up a consolation collection in that event?
Place your bets here NOW!
New Board? I don\'t see any new board...
Vaporware.
<Arms crossed, tapping foot, frowning.>
Can I get the word "Proud" stricken from below my Avatar?
New Board? I don\'t see any new board...
Vaporware.
<Arms crossed, tapping foot, frowning.>
Can I get the word "Proud" stricken from below my Avatar?
He was just posting on dotcom about having secured a new supplier for Venom Aero body parts. He said he was to be stocking these parts soon.
Keep pushing and you might get what you paid for.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.