Search results

  1. A

    Anyone know where this hose goes?

    Thanks so much for the help. Much appreciated. Is it a vacuum line of some sort?
  2. A

    Anyone know where this hose goes?

    My friend is looking at a 2000 rt/10/ Upon popping the hood he found hose with a 90 degree bend in it that was broken. Anyone have any idea where it goes?
  3. A

    Any Bay Area Viper heads????

    Could have been me. I live right off stanley in pleasanton. Park your car at the gym lately?
  4. A

    Any Bay Area Viper heads????

    pleasanton smfettig I think I met you at 24hr fitness in pleasanton last summer
  5. A

    Who Tunes Your Vec-2 in CA?

    giving up on Rick already?
  6. A

    Dyno tomorrow any guess on the #'s

    Re: Dyno tomorrow any guess on the #\'s peter, what was the torque?
  7. A

    Roe Supercharger Pulley Touching Coolant Hose?

    Peter, maybe you should take it back and have them play with it a bit. I haven't had any issues with the hose yet so I am sure it can be moved.
  8. A

    What Does Detonation Sound Like???

    erc racing fuels in San Lorenzo. Buy by the drum if you like. Theres a few stations like the 76 in san jose off of almaden that sell 100. You're NA I think, so you shouldn't need it.
  9. A

    Please help...dyno needed

    if you just want a baseline, there are lots of places to go. Tony is right, you should open and close the hood yourself. I have had mine done at Mustang ranch, newtech, and synergy. You can drive it yourself, it's pretty easy There are plenty of places to go in sacto. You don't need any special...
  10. A

    Please help...dyno needed

    there is software that goes into the stock pcm where you can change parameters, but very few have it. I thnk Dan Cragin has it. No one here in Nor cal seems to have it. other than that without a piggy back like the vec 2 there isn't too much you can do i think. I had mine tuned at synergy in...
  11. A

    Make my Cam more lumpy

    i have all that stuff and the car is loud and extremely lopey at idle. I have had a lot of people ask me what cam I had put in but it is stock. Even people I know that hate vipers ( old muscle car lovers) told me the idle is awesome
  12. A

    speedo stopped working . . .

    I just installed an msd window switch on my 97 gts. It's the one that doesn't need pills. I tapped into the red with yellow wire (number 3 pin)for the tach signal and the switch works fine, but my speedo doesn't work now. Is it possible this had anything to do with it? If not, anything I might...
  13. A

    Roe vs. other SC's

    Re: Roe vs. other SC\'s Okay i did some checking and I was wrong. I was thinking of the eaton with the twisted blades. You are right about the whipple being a twin screw. Sorry everyone-my bad
  14. A

    Roe vs. other SC's

    Re: Roe vs. other SC\'s Why the roll eyes? I think you are wrong to make that statement. If you look at the rotor on them both you will see a whipple is more of a twisted version of the roots blower rotor whereas the twin screw rotors look less like bladed roters and more like a screw.
  15. A

    Intercooler with Roe Supercharger

    the intercooler would have to sit inside the manifold. Being liquid Sean was a bit concerned if it happened to spring a leak, it would be bad for the coolant to go strainght down to the intake runners. Not wanting to run the risk he went with methanol
  16. A

    Roe vs. other SC's

    Re: Roe vs. other SC\'s twin screw suffers less parasitic loss than centrifcal. Only the turbos are more efficient Blue GTS is probably confusing a twin screw with a a whipple or roots.
  17. A

    Bucking Viper....Yee Ha

    I disagree completely with the 3.54 idea. That's what I have and the bucking was the same with both stock and 3.54 gear. Now if you want to put something like a 5.11 or something where you cruise the parking lot at 3000 rpm that would smooth it out. I have done the throttle bodies and cleaned...
  18. A

    Bucking Viper....Yee Ha

    Ever since I've had my viper it has almost violent bucking. Even though it's a gen2 I still checked the throttle bodies. I would like to know if the person who said " VEC 2 done" has actually experienced the bucking and eliminated it with the vec 2. I have the vec 2 on the roe blower and the...
  19. A

    Help, I need to prove a point

    gm hi tech magazine ran a viper vs a z-o6 back in 02 I believe. Viper beat the z by running 11's on a hot day with evan smith driving both cars. Published Article should prove it
  20. A

    anybody know the bolt pattern for a 97 rim?

    I am going to the dyno and they need to know if it will fit my bolt pattern. The dyno is a dynapack that hooks up to the hubs.
  21. A

    Anyone running Nitrous with a Roe blower & methanol?

    The heads were done by Valaya in San Jose. Don't know how much power they added. I have most of the components from the NX kit I had when I ran the 200 wet shot. John, did you set yours up as I described or are you running a dry shot with the vec 2 upping the fuel injectors? Is you nozzle in...
  22. A

    Anyone running Nitrous with a Roe blower & methanol?

    If so how are you set up? I am running a 10lb roe blower with methanol and want to add nitrous The methanol injects in the smooth tubes, one nozzle per tube. I am thinking one NX wet shot nozzle on one smooth tube. Since the mixture goes into the blower chamber I didn't think it was...
  23. A

    Help...Quest for 700 RWHP...Need 80 more..How To...

    from what i have seen here and on the alley, 700 hp probably needs heads. You can pulley up as much as you want, but the choke point is the heads, they simply cannot breath, so higher boost isn't getting you more hp. you will gain some torque, but little or no hp plus you may see your hp...
  24. A

    Napa Valley Ride

    I thought about going, but I got the impression they were doing less driving and more tourist type things like wine tasting, so I didn't go
  25. A

    AC problems....

    yup, no heat will come thru the vents, only the top or bottom.

Latest posts

Members online

Total: 433 (members: 15, guests: 418)

Forum statistics

Threads
153,182
Posts
1,681,805
Members
17,679
Latest member
Kevsmu4

Share this page

Top