Clutch Lowering Kit

[Rheeder218]

Has anyone used one of these? Any experience with one?

eBay Motors: Dodge Viper RT/10 GTS clutch pedal lowering kit (item 320221467601 end time Mar-02-08 06:42:40 PST)

 

[grcforce327]

Search button is your friend!

http://forums.viperclub.org/rt-10-gts-discussions/573269-new-product-gen-1-vipers-only.html

I believe Roe does the GenII's

 

[plumcrazy]

i put the roe on and no problems at all.

 

[Rheeder218]

does it help with your knee not hitting the headlight switch?

 

[plumcrazy]

yes it does but not as much as the seat lowering kit from northwind

 

[puma]

exactly, seat lowering cured my problem of the knee hitting the lower portion of the dash. I don't have my viper anymore but still have the seat lowering kit, let me know if you want to buy it.

 

[Rheeder218]

i put gen 3 seats in so the lowering kit wont work. different seat track compared to gen 1 and gen 2 tracks. Its not that bad with the knee hitting the light switch but every little bit helps. thanks for the offer

 

[Rheeder218]

the roe kit is for the gen 2 only does anyone on here still make the kit for gen 1s?

 

[carguy07]

Tom has a way: http://forums.viperclub.org/members/tom-f-and-l-gor.html

 

[dave6666]

eBay Motors: Dodge Viper RT/10 clutch pedal lowering kit Gen1 (item 320224259462 end time Mar-10-08 10:57:51 PDT)

 

[carguy07]

eBay Motors: Dodge Viper RT/10 clutch pedal lowering kit Gen1 (item 320224259462 end time Mar-10-08 10:57:51 PDT)

That one is new to me. What are the odds that someone made a Gen I kit and no one knows about it? Anyone see this one before?

 

[Tom F&L GoR]

That is one of my kits being sold on eBay. If you need the instructions, let me know.

 

[carguy07]

That is one of my kits being sold on eBay. If you need the instructions, let me know.

That makes more sense. I figured you were the only one out there.

 

[Rheeder218]

That is one of my kits being sold on eBay. If you need the instructions, let me know.

do you have any kits? I would rather buy from a fellow viper owner. thanks

 

[Dave149]

I just put the Roe kit in my gen II, and I found the pedal assembly was loose! The bolt that was loose is accessed behind the PCM on the left side (under the hood) of the foot well. The entire clutch master was moving quite a bit when the clutch pedal was pushed. Not sure if the gen I is bolted in the same but it's something to look at if you do the mod.