EERRRCCCHHHH

[All Blue ACR]

These ought to get her stopped

You must be registered for see images

You must be registered for see images

 

[jmillsUT28]

Sooooooo clean! I love it! Oh yea, I think it will do the job. ha

 

[Fatboy 18]

Daves Big Brake Kit

Save Tators Dodge

 

[Dave's Big Brakes]

These ought to get her stopped

You must be registered for see images

You must be registered for see images

Hey Jim,

Make sure you use the little rubber feet to cushion the lines on the upper control arms so the lines don't rub on the rims

Big Brake dave

 

[All Blue ACR]

Yeah I haven't strapped the front lines down yet; and I still don't know where those lttle rubber donuts (feet?) are supposed to go Dave

 

[Dave's Big Brakes]

Yeah I haven't strapped the front lines down yet; and I still don't know where those lttle rubber donuts (feet?) are supposed to go Dave

There are 2 pictures that I sent you for the brake line routing The rubber feet go between the control arm & the line. Make a figure 8 with the wire tie. New pictures sent

Big Brake Dave

 

[All Blue ACR]

Now I see. Thanks Dave (again)

 

[wastntim]

I'll always take extra pictures.

just waiting for Calipers for R&J

 

[onerareviper]

So what kind of paint + process did you use to clean up those rotors so nice? Inquiring minds want to know....

 

[All Blue ACR]

Rotors are brand new OEM Dodge and I had the hubs, centers and "fins" powdercoated

 

[Purdue_Boiler_Viper]

There are 2 pictures that I sent you for the brake line routing The rubber feet go between the control arm & the line. Make a figure 8 with the wire tie. New pictures sent

Big Brake Dave

Dave,

Could you post the pics here?

 

[kcobean]

I.....hate.....you.

Nice dang breaks though.

 

[Don_]

Dave,

Could you post the pics here?

I'd like to see these pics also.

 

[RTTTTed]

Just 'bedded' my pads on the new 14" front brakes. Wow! I'm probably exagerating ... but I swear it looked like I stopped from 40mph in 40'.

The ABS takes all the excitement out of energency stops though. No squeeling tires, smoke or flat spots. Boring, hit the brakes and it just does a smooth stop. No ABS takes a tiny bit more room to stop, but ... maybe it's worth it?

Love the brakes, I went with lighweight rotors and 13" rears. Great job.

Ted

 

[All Blue ACR]

Thanks Ted, mine might just get out for a romp if (fingers crossed)the weather holds

 

[wastntim]

Getting ready to install my brakes. Can I ask what you used to cut off the tabs? I was thinking about renting a portaband. I thought it might be faster and cleaner than a sawzall

 

[RTTTTed]

Tabs? You mean the 'tabs' that the calipers bolt to?

the 14" calipers use an adapter that bolts to the tabs and resets the new calipers bolt holes in a new location specifically for the Gen 3 calipers.

Perhaps you're asking someone else a different question?

Ted

 

[VIPER BAZ UK]

Think he is on about the rears....

I just used a hand saw.. Took a while though...

 

[Dave's Big Brakes]

I use a sawsall with a 9" blade from Home Depot Works really good and very easy. Rear tabs only PLEASE

Hey Robert, PM sent.

Big Brake Dave

 

[All Blue ACR]

Dave knows best but I don't have a sawzall. Angle grinder with thin disc worked like a charm.
Zing and gone